Buggies

Sort By:  
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine (Readyset) (K.33021B)
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!

With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce, using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust, anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.

●Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
●Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
●Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●High heat dissipation from the brake disk and large capacity center differential deliver control stability, right through to the end of the race.
●Features a large capacity air cleaner that extends the maintenance cycle.
●Wide variety of optional parts provides extensive scope for performance tuning.

Technical datas:
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21SP (recoil starter installed/rear exhaust)

Kit contents:
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

Required for operations:
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

519.72€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Orange T3 (K.33012T3B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - RED (K.34108T2B)

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.


*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

  

Kit Contents 

  • Factory assembled chassis complete with control linkages
  • Finished body complete with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5、2.0、2.5、3.0mm L shaped hex wrenches
  • Cross wrench
  • 17mm wheel wrench

Required for operation 

  • 4 x AA alkaline batteries for transmitter
  • Traveling battery
  • Charger
  • Stabilized power supply
  • Phillips screwdriver (large, small)

Technical data

  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 323~328mm
  • Tread (F/R) 258mm/261mm
  • Tire (F/R) φ115×44mm/φ115×44mm
  • Gear Ratio 12.7:1
  • Weight 3,550g (approx.)
  • Transmitter 2.4GHz Syncro KT-231P+
397.72€  Inc Tax
Kyosho Inferno MP9E EVO V2 1:8 Brushless EP Buggy Readyset (K.34111B)
Kyosho Inferno MP9E EVO V2 1:8 Brushless Electric Powered Buggy Readyset

Advanced racing buggy packed with the latest design features is
ready for action almost straight out of the box

The Inferno MP9e competes at the highest level in major 1/8 scale electric buggy races around the world. To keep pace with the ever-changing race scene, continuous evolution ensures the MP9e Evo incorporates the latest racing technology. Based on the competition-level MP9e racer, this Readyset package represents excellent performance value. While maintaining the exceptional flat maneuverability and aerial control of the previous model, the new chassis layout of the MP9e realizes improved balance for even greater control. The aero body has been designed specially for this electric racing buggy to deliver critical elements such as turning, traction and rough surface performance. At the heart of the MP9e is the new KYOSHO SPEED HOUSE brushless motor and ESC. This factory-finished Readyset package contains nearly everything needed to hit the track; all you need to add is a charged battery to the chassis and batteries for the transmitter! Experience off-road racing with the one machine that will never let you down, the MP9e!

*Rib reinforced long front suspension arms from the Inferno TKI4 realize superior steering response. Front hub carriers with wider 17.5° caster angle also contribute to improved running stability.

●Fully assembled chassis with completed body in a Readyset includes everything except battery for the chassis, battery charger and batteries for the transmitter.
●Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance.
●High torque KS5031-09MW waterproof steering servo included.
●Equipped with stabilizer that reduces roll during cornering and contributes to improved steering response.
●Allows precise setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●Dust guards equipped on rear suspension arms to minimize interference with the drive system.
●Decals applied to wheels improve visibility and styling.
●Full ball bearing specifications.
●Compatible with most optional parts for the Inferno MP9.

Technical datas:
■Length  490mm
■Width  307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Gear Ratio 12.6 : 1 (gear module : 1.0)
■Weight 3400g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor

Readyset Contents:
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
●17mm wheel wrench

Required for Operation:
●4 x AA batteries for transmitter
●2 x batteries for chassis (recommended: 7.2V Ni-MH battery)
●Charger for batteries for chassis

579.50€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Green T4 (K.33012T4B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit (K.34110B)
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit

A star is born in the evolving electric category!
World Champion DNA runs thick in the veins of the new Inferno MP10e

With eight titles at the IFMAR (International Federation of Model Auto Racing) 1/8 scale engine racing buggy World Championships, the Inferno series boasts an unrivaled record of success. Based on the most advanced MP10 model, an electric power unit has transformed this machine to create the new MP10e! Evolution of electric motor and battery technology has delivered speed comparable with engine (GP) models so 1/8 electric racing buggies have become a competition class around the world. The quiet simplicity of electric power opens up more opportunity to enjoy high-performance 1/8 buggy performance. As various manufacturers adapted 1/8 models for competition, Kyosho optimized the weight distribution to enhance the MP10e far beyond the performance of the MP9e Evo. Boasting the performance and reliability of the MP10’s proven suspension and drive system, the MP10e features a specially designed main chassis that provides optimal chassis flex and sure-footed grip with an aerodynamic body designed for this electric model to deliver easy handling at high-speed. The motor mount is compatible with various size motors and supports the left-right distribution of the battery weight. Specially designed receiver box and ESC mount deliver improved maintenance efficiency. For the sharpest racing edge, the enhanced performance of the MP10e will be your first choice in a racing weapon.
Technical datas:
● Length 490mm
● Width 307mm
● Height 180mm
● Wheelbase 325mm (Can be changd by replacing rear hub collars
● Tread(F/R) 254mm
● Tires(F/R) (sold separately)
● Gear Ratio 10.87 : 1 Pinion 14T
● Weight 3,650g (approx.)
● R/C system 2~3ch (sold separately)

Kit Contents:
●Unassembled kit set
●Pinion gear
●Clear body
●Body mask sheet
●Decals
●Manual

Required for Operation:
● 2ch~3ch transmitter & receiver for R/C cars
● servo
● ESC
● Motor
● Tires & inners for 1/8 buggy
● Wheel
● Diff silicone oil
● Shock silicone oil
● Paint for coloring body
● Battries for chassis (2 x 2-cell LiPo) & charger *Not compatible with 4-cell battery packs
● Tools

749.69€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - GREEN (K.34108T1B)
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

Kit Contents 
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench

Required for operation 
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
Technical data

Length 469mm
Width 307mm
Height 189mm
Wheelbase 323~328mm
Tread (F/R) 258mm/261mm
Tire (F/R) φ115×44mm/φ115×44mm
Gear Ratio 12.7:1
Weight 3,550g (approx.)
Transmitter 2.4GHz Syncro KT-231P+

397.72€  Inc Tax
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine (SER600003R21)
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine

Serpent Cobra Buggy RTR GP 1/8 powered by Picco Rebel X .21 engine (Italian manufacturer)

Serpent now offers the Cobra 1/8 scale Buggy also in a Ready To Race version, to make this superb car even more attractive to a broader customer base, so also Hobby racers can now join in for the action. This cool Cobra RTR version includes it all. To top of an already awesome package, Serpent joined forces with Picco from Italy, to include the powerful Monster PICCO Rebel X .21 5-port offroad pullstart engine inside the Cobra !. Top quality components packed in a Ready-to-race package, the best start a Hobby-driver can make. High end racing chassis with top quality parts, impressive DragonRC 2.4 GHz transmitter with nice LCD screen and easy menu, Picco top quality engine with lots of torque and top speed and still easy to start.

Race ready high performance gas powered 1/8 scale buggy.

Expert pre-assembled and pre-set.
Includes powerfull Picco pullstart engine (made in Italy).
4wd with cardan shafts, 3 compact and durable gear diffs, 3-shoe racing clutch, machined aluminium engine mount, central low double brake system, unique angled steering system, 16mm big bore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shock tower FR and RR, 3mm heavy duty chassis plate with kick-up, durable suspension and transmission parts, captured suspension pins, the works!!
Dragon-RC pistol type transmitter 2.4 GHz with large LCD screen.
Dragon-RC 10.5kg strong servo’s with metal gears.
Dragon-RC high grip pre mounted race tyres and wheels.
DragonRC polished inline tuned pipe system.
Pre painted and precut Avenger Cobra bodyshell and large nylon rear aero-wing.
Full color user manual and decal set included.
Fully upgradable to full race spec, as all parts of the Cobra race buggy fit.

Needed to complete the car:
- 4 x AA batteries for the transmitter
- Receiver battery NiMh / LiFe / LiPo
- nitro fuel and fuel bottle
- glow plug starter

449.57€  Inc Tax
Kyosho FO-XX VE 1:8 RC 4WD READY SET EP (K.34255B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with brushless power system makes the 1/8 scale FO-XX VE 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX VE 2.0 makes full use of the 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor on any surface, from rough roads to tarmac. In addition to the brushless motor, the speed controller, transmitter, receiver, wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX VE 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter transmitter/receiver and battery for the motor with a charger and this factory-assembled Readyset makes the dynamic performance of the FO-XX VE 2.0 easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter and chassis plus a battery charger to run.
●KYOSHO SPEED HOUSE brushless system delivers breathtaking power and performance.
●Independent left-right battery boxes suit various size batteries. Suitable for twin packs of 7.2V Ni-MH to 7.4V Li-Po batteries.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differentials incorporate steel spiral gears to meet the demands of this high power machine.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.


Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires(F & R) φ155 x 70.5mm
■Gear Ratio 8.68:1
■Weight 4,650g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation

●AA-size batteries x 4 for transmitter
●Battery for chassis x 2 (7.2V Ni-MH or 7.4V Li-Po) ※ Super Plug
●Charger for chassis battery

488.00€  Inc Tax
Per Page      1 - 10 of 10
  • 1