Tools & Accessories

Receiver Battery Box for loose NiMh, NiCd cells

4xAA (4.8V)

For radio controlled cars, buggies and other models requiring 4AA (4.8V) power supply.

BAT-SAFE-MINI Battery Safe Charging and Storage Box

The simple solution to safely charge any battery containing lithium.
If you are into drones, FPV or Radio Controlled models, or just using LiPo batteries in other applications, be aware that they might catch on fire whilst charging.
The BAT-SAFE is a double walled insulated steel box with a flame arrestor. Any battery within the specifications will be no fire hazard if charged or stored inside the BAT-SAFE.
In case of an accident, the smoke and soot is also filtered by the flame arrestor.
BAT-SAFE did already save homeowners from losing their property.
It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 2pc 3S 2200mAh equivalent (50Wh) safely inside the BAT-SAFE-MINI.

Charging space: 165x100x50mm
Outer dimensions: 195x128x115mm
Weight: 0.7kg

Never leave batteries unattended while charging!

Hitec DPC-11 PC program interface for all Hitec programmable servos

G.T. Power 3 Mode CCPM Servo and ESC Consistency Tester

This portable device allows you to test the functionality of your servos and ESC without having to connect your radio, receiver and battery. Servos testers also allow you to easily center your servos when attaching servo horns and making control surface adjustments.

Features:
Three modes to check ESC or Servos:
Manual: Turn the knob with different speed and check the response time
Neutral: Test the center point of your servo
Automatic: Make the servo swing automatically to the greatest angle

Connect up to three servos at one time
Connect up to three ESCs at one time to test response time

Specification:
49x29x43mm
Input Voltage: 4.8-6V

Battery Checker / Servo Tester / Balance Discharger

Capable of giving voltage and capacity readings on 2 - 8s Lithium packs and 4 - 12s Nickel packs, balance discharging Lithium packs and it can even test servos and ESC's.

With a simple to read LCD display and easy to operate buttons allowing you to cycle through the different readings, this is one the things that everybody should have in their flight box.

Digital voltage meter for 2-8 cell LiPo, LiFe, Li-ion batteries with adjustable low voltage audible signal (buzzer/alarm) (2.70-3.80V). Also offers 4-15 V voltage measurement for NiXX batteries.

Features:

• Convenient, economical, pocket-sized glow starting system.
• Enough power for a full day use.
• Simple thumb pressure locks the plug heater to the glow plug (no pushing or twisting).
• Works with SC battery (included).
• Fits any glow plug including new 4-cycle glow plugs.

SkyRC GSM-015 GNSS Speed and Altitude Meter

Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GNSS SPEED METER by SkyRC. This gadget is ideal for RC racing/flying and casual biking, driving and long journey.

Measure Top Speed, Average Speed and Top Altitude

The user could easily view the screen while working out data such as speed, altitude, total mileage/kilometer, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets to achieve better performance.

Reception of GPS & GLONASS Satellites
GSM-015 supports GNSS (Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will improve positional accuracy by tracking two satellite constellations instead of just one (GPS).

Built-in 1M Memory & Update frequency up to 10Hz
Update frequency is selectable from 1Hz to 10Hz. The higher update frequency is, the more accurate data the user will get. The built-in memory is 1M and can keep recording for 18 hours at 1Hz update frequency. And all the data can be transferred to PC and Mac and shown on Bing Maps. When the Flash is full, the previous record will be replaced automatically. No need to think about clearing data all the time or worry about missing the critical tracking data, when the memory is full.

Support both Metric and Imperial system of Measurement
The Metric and Imperial systems can be switched easily at the user’s finger. Hold and press the MODE button to change.

It comes with a built-in rechargeable LiPo battery. The capacity is 200 mAh and the operating time is up to 150 minutes.

PC link for data logging & Bing Maps
The GNSS LOGGER software is compatible with Windows 7 and above or macOS 10.12 and above.

With GNSS LOGGER, the user could:
Transfer the log data to computer and show the track data on built-in globally accessible Bing Maps
Save the log data to computer
Change Metric and Imperial system of measurement
Change time zone
GNSS update rate selection
Firmware upgrade

Kyosho Dampers Pit Holder with Magnet

Nitro Starter KIT with EU Charger

Graupner Remote Glow Plug Clip/Connector with short neck

Spring loaded glow plug clip
Length: 75mm

Racing Experience Fuel Bottle

Size: 350ml

TFL High quality Hex Wrench Set 1.5/2.0/2.5/3.0mm (Black)

TFL High quality Hex Wrench Set Ball End 1.5/2.0/2.5/3.0mm (Black)

Team EDS Clutch Spring Tool for Buggy

Team EDS Flywheel Wrench Tool

This tool helps you to glue the tyres on the rims without extra residue. Quick and easy assembly. Insert the tyres, close the lid ring and you're ready to glue.

Tool for 1:8 size buggies,..

Team EDS Flywheel Remover for internal combustion onroad and offroad vehicles

Tool for 1:8 and 1:10 cars, buggies, truggies,..

TFL Racing Cross Hex Wrench - inner 2.5/5.0mm and outer 5.5/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Car Maintenance Stand - High (black)

Features:
Adjustable height
360 rotation with lock mechanism

Specifications:
Length: 140mm
Width: 134mm
Height: 64-119mm

Tool / Maintenance stand for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Car Maintenance Stand - (black)

Features:
Adjustable height
360 rotation with lock mechanism

Specifications:
Length: 140mm
Width: 134mm
Height: 64-90mm

Tool / Maintenance stand for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Cross Hex Wrench 4.0/5.5/7.0/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing RC Tool Organizer (Wrench) Stand

Tools for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Tool Set 10 in 1 with Bag 1-/0+/4.0/5.5/1.5/2.0/2.5/3.0mm

Set includes:
Philips Screwdriver 3.0mm
Flat Screwdriver 3.0mm
Hex Wrench 1.5mm / 2.0mm / 2.5mm
Hexagon Socket Screwdriver 4.0mm / 5.0mm
Needle-nose Plier
Diagonal Cutter
Ball Link Plier
Touls Pouch

Tools for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Reamer Tool (0-14mm)

Tools for 1:8 and 1:10 cars, buggies, truggies, trucks,..

BSD Racing Starter Box 2x550 Motor

Features:
The power ports on the side can be used for charging or powering other accessories.

Dual Motor Power:
Two powerful motors provide ample power for starting even the largest displacement car engines and can be arranged in two different configurations to facilitate different engine orientations.

Adjustable switch timing:
The switching mechanism can be adjusted to start the internal motors turning before the main wheel get in contact with the engine flywheel.

Two Power Options:
Starter Box can be powered using two 7.2V 6-cell Sub C stick packs or by 12V Pb battery.


Batteries are not included.

BAT-SAFE-XL Battery Safe Charging and Storage Box

The simple solution to safely charge any battery containing lithium.
If you are into drones, FPV or Radio Controlled models, or just using LiPo batteries in other applications, be aware that they might catch on fire whilst charging.
The BAT-SAFE is a double walled insulated steel box with a flame arrestor. Any battery within the specifications will be no fire hazard if charged or stored inside the BAT-SAFE.
In case of an accident, the smoke and soot is also filtered by the flame arrestor.
BAT-SAFE did already save homeowners from losing their property.
It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 2pc 6S 5000mAh equivalent (222Wh) safely inside the BAT-SAFE.

Charging space: 240x165x102mm
Outer dimensions: 305x230x178mm
Weight: 1.85kg

Never leave batteries unattended while charging!

Features:

• Convenient, economical, pocket-sized glow starting system.
• Enough power for a full day use.
• Simple thumb pressure locks the plug heater to the glow plug (no pushing or twisting).
• Works with AA batteries.
• Fits any glow plug including new 4-cycle glow plugs.