Trucks

Sort By:  
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green) (TOR9208056)
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green)

Torro RC Mini Racing Truggy Car
High speed about 25 km/h with RC Remote Control and many functions.
Automatic and patented 5-speed transmission. Comes with 20 pylons for race events.

FEATURES:
R/C Mini Racing Stunt Truggy 1/40 (green)
Remote controler with 30-40m range
Rollover protection case for hot stunts!
Ground clearance 10mm
Wheelbase 53mm
Track width 42mm
Up/down / right/left
Trim function for forward/reverse
Turbo speed of up to 25 km/h
6-10 minute drive (depending on the terrain and battery condition)
Vehicle Battery 3.7V 120 mAh LiPo
Charging time: about 40 minutes
Length: approx. 12cm
Height: approx. 5cm
Width: approx. 8.5cm
20 pylons
USB charging cable
Instruction manual

Remote control batteries required 6 x AA (not included)

Warnings:
Use under direct adult supervision only.
Minimum Age: 8 Years
Age recommendation: 14 Years
Not suitable for children under 36 months of age. Choking hazard due to small parts.

22.57€  Inc Tax
Kyosho Psycho Kruiser 2.0 VE 1:8 RC 4WD Readyset EP (K.34256B)
New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER VE incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful newly developed 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add AA-size batteries for the transmitter and a battery for the chassis and the MAD CRUSHER VE Readyset will get you straight into monster trucking action!

Fully assembled Readyset only requires four AA-size alkaline batteries for the transmitter and battery for the chassis.
1/8 scale Mad Force Kruiser 2.0 VE monster truck chassis base incorporates new 5-link suspension.
Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
Rigid axles on front and rear with solid casing effectively transfer power into traction.
Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
KYOSHO SPEED HOUSE brushless system provides powerful performance.
Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
Receiver and battery are stored in radio box for protection against shocks and dirt.
Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis.

Specification:
Length 590mm
Width 376mm
Height 275mm
Wheelbase 351mm
Tread 306mm
Tires(F & R) φ150×70mm
Gear Ratio 20.52:1
Weight 4,700g (approx.)
Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

Readyset Contents:
Factory assembled chassis complete with control linkages
Pre-cut and painted body complete with decals applied
2.4GHz Syncro KT-231P+ transmitter
L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
Cross wrench (large)
17mm wheel wrench

Required for Operation:
4x AA batteries for transmitter
2x 3S LiPo Battery for model
Battery Charger

619.76€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 Truggy with Picco Rebel XL Engine (Readyset) (K.33016RXL)
Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
Comes with upgraded PICCO REBEL XL (pullstart) engine with premium polished muffler and manifold.
Maintenance-friendly chassis construction has removed the use of E-rings.
Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
Equipped with stabilizer bars on front and rear to control chassis roll through corners.
High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents:
Fully assembled chassis complete with RC linkages
Pre-cut body finished with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5, 2.0, 2.5, 3.0mm hex wrenches
Cross wrench (large)
17mm wheel wrench

Required for operation:
8 x AA-size alkaline batteries for receiver and transmitter
Engine starting tools (fuel bottle, plug heater)

Technical data:
Length : 550mm
Width : 427mm
Height : 225mm
Ground Clearance : 40mm
Wheelbase : 355mm
Tread (F/R) : 289mm / 289mm
Tire(F/R) :Φ148×66mm / Φ143×66mm
Gear Ratio :14.6:1
Weight : 3,750g approx.
Motor : Picco Rebel EXL
Transmitter 2.4GHz Syncro KT-231P+

539.85€  Inc Tax
Arrma 1/7 Infraction 4WD 6S BLX V2 All-Road Truck RTR - Blue (ARA7615V2T1)
Take high-speed street bashing performance to another level with the 1/7 scale ARRMA® INFRACTION™ 6S BLX 4WD RTR. Capable of 125+ km/h speeds out of the box over on-road, dirt, and oval tracks, it now includes a handbrake and Spektrum® Smart electronics.

Features:
Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™)
Spektrum® Firma™ 150A Smart ESC
dBoots® Hoons™ all-road tires
RTR Completion Level includes everything needed besides batteries and a compatible charger

What's in the Box?
1x 1/7 Arrma® INFRACTION™ Resto Mod Street Bash 6S BLX 4WD RTR
1x Spektrum® Firma™ 150A Smart ESC
1x Spektrum® Firma™ 4074 2050Kv Brushless Motor
1x ARRMA® ADS-15M Waterproof* Servo
1x Spektrum® SPMS650 Waterproof* Brake Servo
1x Spektrum® SR6110AT AVC Receiver
1x Spektrum® DX3™ DSMR® Radio
1x Product Manual

Needed to Complete
1x 2S or 3S LiPo Battery
1x Battery Charger
4x AA Batteries

689.91€  Inc Tax
Arrma 1/10 Granite 4WD V3 3S BLX Brushless Monster Truck RTR - Green (ARA4302V3T1)
The ready-to-run ARRMA® GRANITE™ 4X4 3S BLX Monster Truck delivers jaw-dropping power and 80+ km/h brushless performance — and now includes a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, stronger steering servo and other upgrades.

Features:
Stronger chassis and retained hinge pin plates
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Plastic locknut for slipper
Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.

What's in the Box?
1x ARRMA® GRANITE™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR
1x BLX100 2S/3S Waterproof* ESC
1x Spektrum™ Firma™ 3660 3200Kv Brushless Motor
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Spektrum™ SLR300 Receiver
1x Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
1x 23T Spline servo saver
1x Product Manual

Needed to Complete
1x 2S LiPo or 3S Hardcase LiPo Battery
1x Battery Charger
4x AA Batteries

379.42€  Inc Tax
Arrma 1/7 Infraction 4WD 6S BLX V2 All-Road Truck RTR - Silver (ARA7615V2T2)
Take high-speed street bashing performance to another level with the 1/7 scale ARRMA® INFRACTION™ 6S BLX 4WD RTR. Capable of 125+ km/h speeds out of the box over on-road, dirt, and oval tracks, it now includes a handbrake and Spektrum® Smart electronics.

Features:
Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™)
Spektrum® Firma™ 150A Smart ESC
dBoots® Hoons™ all-road tires
RTR Completion Level includes everything needed besides batteries and a compatible charger

What's in the Box?
1x 1/7 Arrma® INFRACTION™ Resto Mod Street Bash 6S BLX 4WD RTR
1x Spektrum® Firma™ 150A Smart ESC
1x Spektrum® Firma™ 4074 2050Kv Brushless Motor
1x ARRMA® ADS-15M Waterproof* Servo
1x Spektrum® SPMS650 Waterproof* Brake Servo
1x Spektrum® SR6110AT AVC Receiver
1x Spektrum® DX3™ DSMR® Radio
1x Product Manual

Needed to Complete
1x 2S or 3S LiPo Battery
1x Battery Charger
4x AA Batteries

689.91€  Inc Tax
Arrma 1/10 Granite 4WD V3 3S BLX Brushless Monster Truck RTR - Red (ARA4302V3T2)
The ready-to-run ARRMA® GRANITE™ 4X4 3S BLX Monster Truck delivers jaw-dropping power and 80+ km/h brushless performance — and now includes a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, stronger steering servo and other upgrades.

Features:
Stronger chassis and retained hinge pin plates
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Plastic locknut for slipper
Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.

What's in the Box?
1x ARRMA® GRANITE™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR
1x BLX100 2S/3S Waterproof* ESC
1x Spektrum™ Firma™ 3660 3200Kv Brushless Motor
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Spektrum™ SLR300 Receiver
1x Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
1x 23T Spline servo saver
1x Product Manual

Needed to Complete
1x 2S LiPo or 3S Hardcase LiPo Battery
1x Battery Charger
4x AA Batteries

379.42€  Inc Tax
Arrma 1/10 Granite 4WD V3 MEGA 550 Brushed Monster Truck RTR - Blue (ARA4202V3T1)
Updated for even better all-terrain bashing, the 1/10 scale ARRMA® GRANITE™ 4X4 MEGA 550 RTR monster truck now includes a 3-channel Spektrum™ SLT3™ radio, more powerful steering servo, higher capacity NiMh battery for longer run times — and more.

Features:
MEGA 12T brushed 550 motor
MEGA waterproof ESC
IC3™ connectors (EC3™) compatible
45+ km/h speed achievable in optimum driving conditions with optional gearing
Ready to Run (RTR) comes fully assembled with everything needed besides AA batteries!

What's in the Box?
1x Arrma® GRANITE™ 4X4 MEGA 550 1/10 Scale 4WD Electric Monster Truck RTR
1x MEGA Waterproof* ESC
1x MEGA 12T Brushed 550 Motor
1x Spektrum™ Waterproof* SPMS650 Digital Servo
1x Spektrum™ SLR300 Receiver
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Dynamite® 3300mAh 8.4V 7-Cell Speedpack® 2 Hump NiMH Battery
1x ADC-N7 7-Cell NiMH Wall Charger
1x Product Manual

Needed to Complete
4x AA Batteries

269.62€  Inc Tax
Arrma 1/10 Big Rock 4WD V3 3S BLX Brushless Monster Truck RTR - Black (ARA4312V3)
The ARRMA® BIG ROCK™ CREW CAB 4X4 3S BLX offers scale realism, dirt-chucking action and 80+ km/h speed potential! It’s also updated with a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, wider stance, stronger steering servo and more.

Features:
Spektrum™ Firma™ 3660 3200Kv brushless motor with Safe D pinion and ARRMA® heatsink and cooling fan
Stronger chassis and retained hinge pin plates
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.

What's in the Box?
1x Arrma® BIG ROCK™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR BLX100 2S/3S Waterproof* ESC
1x Spektrum™ Firma™ 3660 3200Kv Brushless Motor
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Spektrum™ SLR300 Receiver
1x Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
1x Product Manual

Needed to Complete
1x 2S LiPo or 3S Hardcase LiPo Battery
1x Batterry Charger
4x AA Batteries

359.90€  Inc Tax
379.42€
Arrma 1/10 Senton 4WD V3 3S BLX Brushless Short Course Truck RTR - Red (ARA4303V3T2)
Extreme toughness and 80+ km/h speed separate the SENTON™ 4X4 3S BLX Short Course model from the pack. It’s now better than ever, with a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, more powerful steering servo and other upgrades.

Features:
Stronger chassis and retained hinge pin plate
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Plastic locknut for slipper
Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.

What's in the Box?
1x Arrma® SENTON™ 4X4 3S BLX 1/10 Scale 4WD Electric Short Course Truck RTR
1x BLX100 2S/3S Waterproof* ESC
1x Spektrum™ Firma™ 3660 3200Kv Brushless Motor
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Spektrum™ SLR300 Receiver
1x Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
1x Product Manual

Needed to Complete
1x 2S LiPo or 3S Hardcase LiPo Battery
1x Batterry Charger
4x AA Batteries

379.42€  Inc Tax
Arrma 1/10 Senton 4WD V3 3S BLX Brushless Short Course Truck RTR - Blue (ARA4303V3T1)
Extreme toughness and 80+ km/h speed separate the SENTON™ 4X4 3S BLX Short Course model from the pack. It’s now better than ever, with a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, more powerful steering servo and other upgrades.

Features:
Stronger chassis and retained hinge pin plate
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Plastic locknut for slipper
Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.

What's in the Box?
1x Arrma® SENTON™ 4X4 3S BLX 1/10 Scale 4WD Electric Short Course Truck RTR
1x BLX100 2S/3S Waterproof* ESC
1x Spektrum™ Firma™ 3660 3200Kv Brushless Motor
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Spektrum™ SLR300 Receiver
1x Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
1x Product Manual

Needed to Complete
1x 2S LiPo or 3S Hardcase LiPo Battery
1x Batterry Charger
4x AA Batteries

379.42€  Inc Tax
Arrma 1/10 Senton 4WD V3 MEGA 550 Brushed Short Course Truck RTR - Red (ARA4203V3T1)
Optimized for bashers, the 1/10 scale ARRMA® SENTON™ 4X4 MEGA 550 Short Course Truck comes newly equipped for even greater strength and power, with a 3-channel Spektrum™ SLT3™ radio, more powerful steering servo and higher capacity NiMH battery.

Features:
MEGA 12T brushed 550 motor
MEGA waterproof ESC
IC3™ connectors (EC3™) compatible
45+ km/h speed achievable in optimum driving conditions with optional gearing
Ready to Run (RTR) comes fully assembled with everything needed besides AA batteries!

What's in the Box?
1x Arrma® SENTON™ 4X4 MEGA 550 1/10 Scale 4WD Short Course Truck RTR
1x MEGA Waterproof* ESC
1x MEGA 12T Brushed 550 Motor
1x Spektrum™ Waterproof* SPMS650 Digital Servo
1x Spektrum™ SLR300 Receiver
1x Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
1x Dynamite® 3300mAh 8.4V 7-Cell Speedpack® 2 Hump NiMH Battery
1x ADC-N7 7-Cell NiMH Wall Charger
1x Product Manual

Needed to Complete
4x AA Batteries

269.62€  Inc Tax
Kyosho Nitro Tracker 1:10 RC Nitro 4WD READY SET (K.33101B)
QRC + 2-speed automatic transmission delivers mind-blowing performance! Engine-powered R/C car recreates the feeling of driving a real car.

With the rock-solid running stability of a big tire machine with wide tread, the nearly square dimensions of the Nitro Tracker produces incredible driving capability. Take this 1/10 scale off-road truck anywhere you like to enjoy the advanced high-performance mechanics of this real engine-powered R/C car, such as the QRC (Quick Reverse Clutch) that enables forward, neutral and reverse operation. The 3rd channel on the KT-231P+ transmitter operates a servo to shift the gears on the QRC to change the drive gears between Forward-Neutral-Reverse, just like a real automobile. The pre-installed powerful KE15SP engine combines with the maintenance-friendly radio box and fuel pump that sends fuel efficiently to the carburetor from the fuel tank and engine-stop lever that safely brings the engine to a stop. With this Readyset, all you need is fuel, engine starting tools, and batteries to experience the dynamic realistic performance of the awesome Nitro Tracker !

Readyset features pre-assembled 4WD chassis with shaft-driven 4 bevel gear diffs on front and rear and finished body set.
3rd channel operates the QRC system (Quick Reverse Clutch) to control forward, neutral and reverse.
2-speed transmission with adjustable shift timing makes maximum use of the KE15SP engine’s power band.
One-piece stiffener and radio box increases chassis rigidity and provides dustproof cover for receiver and battery.
Includes waterproof KS4031-06W servos for steering, throttle and shift change.
Double wishbone suspension with adjustable camber and toe angle.
Body post height can be adjusted in 2mm increments..


Kit Contents:
Completed chassis with R/C radio installed
Transmitter (KT-231P +)
Binding stick
Hex wrench (1.5mm / 2mm / 2.5mm)
Cross wrench (large)
Instruction manual
2 nylon straps (for fixing air cleaner)

Required for operation:
8 x AA batteries for transmitters and receivers
Starting tool (fuel pump, plug heater)
Glow fuel

Technical data:
Length 418.5mm 
Width 321mm 
Height 194mm 
Weight 2,650g (approx.)
Wheelbase 298.5mm
Tread (F/R) 265mm
Tires (F/R interchangeable) φ120×56mm
Gear Ratio Forward (1st) 20.9:1 / (2nd) 13.9:1
Reverse (1st) 24.1:1 / (2nd) 16.0:1
Engine KE15SP with recoil

387.96€  Inc Tax
Arrma 1/8 NOTORIOUS 6S V5 4WD BLX Stunt Truck RTR (Spektrum SLT3) - Black (ARA8611V5T1)
Beneath its 1950s “Real Steel” body, the 1/8 scale NOTORIOUS™ 6S BLX 4WD has an ARRMA® tough design that’s ideal for wheelie-popping, back-flipping stunts — now made even easier with a Spektrum™ SLT3™ radio, dual protocol receiver, Smart ESC and more.

Features:
Updated with Spektrum™ components and Smart compatible
90+ km/h speeds achievable in optimum conditions using a 6S LiPo battery with optional speed pinion gear
EXB compatible front brace
Large volume waterproof receiver box
Ready-to-run - just install a charged 4 cell or 6 cell LiPo battery of your choice

The 1/8 scale NOTORIOUS™ 6S BLX Stunt Truck 4WD unleashes wheelie-popping, back-flipping, outrageous action with one-of-a-kind style. Its custom 1950s body offers more than streamlined good looks and a matte black or matte blue factory finish. Its exclusive ARRMA® "Real Steel" effect adds eye-catching realism that only improves with severe bashing. The more scratched and scarred your Stunt Truck becomes, the more authentic and amazing it looks.

What's in the Box?
1x Arrma® NOTORIOUS™ 6S BLX 1/8 Stunt Truck 4WD RTR (ready-to-run)
1x Spektrum™ Firma™ 150A Smart 4S/6S ESC
1x Spektrum ™ Firma ™ 4074 2050Kv Brushless Motor with ARRMA® Heatsink
1x Spektrum ™ S652 Metal-Geared Digital Servo
1x Spektrum ™ SR315 3-Channel Dual Protocol Receiver
1x Spektrum ™ SLT3™ 2.4GHz 3-Channel Radio
1x Product Manual

Needed to Complete
1x 4S or 6S LiPo Battery
1x Battery Charger
4x AA Batteries for Transmitter

649.65€  Inc Tax
Arrma 1/8 NOTORIOUS 6S V5 4WD BLX Stunt Truck RTR (Spektrum SLT3) - Blue (ARA8611V5T2)
Beneath its 1950s “Real Steel” body, the 1/8 scale NOTORIOUS™ 6S BLX 4WD has an ARRMA® tough design that’s ideal for wheelie-popping, back-flipping stunts — now made even easier with a Spektrum™ SLT3™ radio, dual protocol receiver, Smart ESC and more.

Features:
Updated with Spektrum™ components and Smart compatible
90+ km/h speeds achievable in optimum conditions using a 6S LiPo battery with optional speed pinion gear
EXB compatible front brace
Large volume waterproof receiver box
Ready-to-run - just install a charged 4 cell or 6 cell LiPo battery of your choice

The 1/8 scale NOTORIOUS™ 6S BLX Stunt Truck 4WD unleashes wheelie-popping, back-flipping, outrageous action with one-of-a-kind style. Its custom 1950s body offers more than streamlined good looks and a matte black or matte blue factory finish. Its exclusive ARRMA® "Real Steel" effect adds eye-catching realism that only improves with severe bashing. The more scratched and scarred your Stunt Truck becomes, the more authentic and amazing it looks.

What's in the Box?
1x Arrma® NOTORIOUS™ 6S BLX 1/8 Stunt Truck 4WD RTR (ready-to-run)
1x Spektrum™ Firma™ 150A Smart 4S/6S ESC
1x Spektrum ™ Firma ™ 4074 2050Kv Brushless Motor with ARRMA® Heatsink
1x Spektrum ™ S652 Metal-Geared Digital Servo
1x Spektrum ™ SR315 3-Channel Dual Protocol Receiver
1x Spektrum ™ SLT3™ 2.4GHz 3-Channel Radio
1x Product Manual

Needed to Complete
1x 4S or 6S LiPo Battery
1x Battery Charger
4x AA Batteries for Transmitter

649.65€  Inc Tax
Arrma 1/8 Kraton 6S BLX 4WD Brushless Truggy RTR (Spektrum STX2) - Blue (ARA106040T2)
The ARRMA® KRATON™ 6S BLX 4WD Speed Monster Truck reaches a mind blowing 90+ kph, driven by its 6S capable brushless power system and durable design. Now comes complete with the 2.4GHz Spektrum™ STX2® radio system, it's fully equipped for fast, all-terrain bashing!

RTR (Ready-to-run)
Extremely durable
Fast, 90+ kph speed potential
150A, 6S LiPo ready (3S, 4S and 6S LiPo compatible)
Anodized aluminum chassis
Heavy-duty drivetrain
All-metal diff outdrives and gearbox internals
Durable steel driveshafts
Oil-filled adjustable shocks
Black anodized aluminum front and rear shock towers
Super-durable wheel hubs
Spektrum™ 2.4GHz STX2® Radio with SRX200 Receiver
BLX4074 2050Kv brushless motor
BLX185 waterproof 4S/6S ESC (fitted with IC5™ connector and EC5™ compatible)
ADS-15M waterproof 15kg-cm metal-geared servo

What's in the Box?
1x Arrma KRATON 6S BLX 4WD Speed Monster Truck RTR
1x Spektrum 2.4GHz STX2 Radio Transmitter
1x Product Manual

Needed to Complete
2x 2S or 3S 5000mAh LiPo batteries
or
1x 4S or 6S 5000mAh LiPo battery
1x Battery Charger
4x AA batteries (for transmitter)

589.87€  Inc Tax
Arrma 1/8 Kraton 6S BLX 4WD Brushless Truggy RTR (Spektrum STX2) - Red (ARA106040T1)
The ARRMA® KRATON™ 6S BLX 4WD Speed Monster Truck reaches a mind blowing 90+ kph, driven by its 6S capable brushless power system and durable design. Now comes complete with the 2.4GHz Spektrum™ STX2® radio system, it's fully equipped for fast, all-terrain bashing!

RTR (Ready-to-run)
Extremely durable
Fast, 90+ kph speed potential
150A, 6S LiPo ready (3S, 4S and 6S LiPo compatible)
Anodized aluminum chassis
Heavy-duty drivetrain
All-metal diff outdrives and gearbox internals
Durable steel driveshafts
Oil-filled adjustable shocks
Black anodized aluminum front and rear shock towers
Super-durable wheel hubs
Spektrum™ 2.4GHz STX2® Radio with SRX200 Receiver
BLX4074 2050Kv brushless motor
BLX185 waterproof 4S/6S ESC (fitted with IC5™ connector and EC5™ compatible)
ADS-15M waterproof 15kg-cm metal-geared servo

What's in the Box?
1x Arrma KRATON 6S BLX 4WD Speed Monster Truck RTR
1x Spektrum 2.4GHz STX2 Radio Transmitter
1x Product Manual

Needed to Complete
2x 2S or 3S 5000mAh LiPo batteries
or
1x 4S or 6S 5000mAh LiPo battery
1x Battery Charger
4x AA batteries (for transmitter)

589.87€  Inc Tax
Arrma 1/5 Outcast 8S BLX 4WD Brushless Stunt Truck RTR (Spektrum DX3) (ARA5810)
Driven by 8S brushless power and an ARRMA®-tough design, the OUTCAST™ 8S BLX 4WD delivers the torque, acceleration and speed you need for extreme action in 1/5 scale.

This ready-to-run stunt truck comes equipped to defy gravity right out of the box. From the heavy-duty front bumper to the wheelie bar in back, it's engineered to do it all:

long, tall wheelies;
tight, fast donuts;
standing and aerial backflips;
high leaps into the air;
and more — over all terrain, in all conditions.

Just add your choice of batteries and charger and go. The OUTCAST™ 1/5 8S BLX 4WD includes a Spektrum™ DX3™ Smart transmitter and SRS6110AT AVC® (Active Vehicle Control®) receiver that take full advantage of the Spektrum™ Smart Firma™ brushless motor and ESC's innovative telemetry capabilities.

Download the free Spektrum™ Dashboard App to your mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time. Dial-in extra stability with the radio's AVC® system to carve corners and nail jumps without letting up on the throttle.

Bigger than big and engineered for brute power and toughness, the ARRMA® 1/5 scale OUTCAST™ 8S BLX 4WD Stunt Truck

What's in the Box?
1x OUTCAST™ 1/5 8S BLX 4WD Stunt Truck RTR
1x Spektrum™ DX3 3-channel 2.4GHz Smart Radio with SR6100AT AVC® Receiver
1x Spektrum™ Firma™ 160A Smart ESC
1x Spektrum™ Firma™ 1250Kv Brushless Motor
1x Spektrum™ S905 Metal-Geared Digital Servo (40kg-cm @ 7.4V)

Needed to Complete
2x 4S LiPo Batteries (4S 5000mAh recommended)
1x Battery Charger (Dual port charger / 2X100W recommended)
4x AA Batteries for Transmitter

1,039.44€  Inc Tax
Arrma 1/5 Kraton 4WD 8S BLX Brushless Speed Monster Truck RTR (Spektrum DX2e) - Orange (ARA110002V1T2)
Take bashing to the next level with the 1/5 scale ARRMA® KRATON™ 8S BLX 4WD Speed Monster Truck.

DESIGNED FAST and DESIGNED TOUGH, it’s ready-to-run out of the box and comes with nearly everything you need — just add your preferred batteries and charger.

The KRATON 8S BLX 4WD is capable of 80+ kph speeds in optimum driving conditions using an 8S LiPo (2 x 4S LiPo batteries) and optional pinion gear.

The speed potential is amazing — and you’ll be able to use it all.

What's in the Box?
1x KRATON™ 8S BLX SPEED Monster Truck
1x Spektrum™ DX2e 2-channel 2.4GHz Radio with SR6100AT AVC® Receiver
1x Spektrum™ Firma™ 160A Smart ESC
1x Spektrum™ Firma™ 1250kv Brushless Motor
1x Spektrum™ S905 Metal-Geared Digital Servo (40kg-cm @ 7.4V)
1x Product Manual

Needed to Complete
2x 4S LiPo Batteries (4S 5000mAh recommended)
1x Battery Charger (Dual port charger / 2X100W recommended)
4x AA Batteries for Transmitter

999.79€  Inc Tax
Arrma 1/5 Kraton 4WD 8S BLX Brushless Speed Monster Truck RTR (Spektrum DX2e) - Green (ARA110002V1T1)
Take bashing to the next level with the 1/5 scale ARRMA® KRATON™ 8S BLX 4WD Speed Monster Truck.

DESIGNED FAST and DESIGNED TOUGH, it’s ready-to-run out of the box and comes with nearly everything you need — just add your preferred batteries and charger.

The KRATON 8S BLX 4WD is capable of 80+ kph speeds in optimum driving conditions using an 8S LiPo (2 x 4S LiPo batteries) and optional pinion gear.

The speed potential is amazing — and you’ll be able to use it all.

What's in the Box?
1x KRATON™ 8S BLX SPEED Monster Truck
1x Spektrum™ DX2e 2-channel 2.4GHz Radio with SR6100AT AVC® Receiver
1x Spektrum™ Firma™ 160A Smart ESC
1x Spektrum™ Firma™ 1250kv Brushless Motor
1x Spektrum™ S905 Metal-Geared Digital Servo (40kg-cm @ 7.4V)
1x Product Manual

Needed to Complete
2x 4S LiPo Batteries (4S 5000mAh recommended)
1x Battery Charger (Dual port charger / 2X100W recommended)
4x AA Batteries for Transmitter

999.79€  Inc Tax
Kyosho Blizzard 2.0 1:12 READY SET EP (K.34902B)

Mighty belt-tracked vehicle powers over sand, dirt and snow!
User-friendly Readyset with 2.4GHz R/C system also provides blade arm control!

Powered by two independent side-by-side motors, the transmission in the Blizzard 2.0 Readyset delivers awesome power and free control so you can enjoy dominance over any terrain like only a true belted vehicle can deliver. With a suspension system equipped on all wheels, the Blizzard clears every challenge in its path including rocky obstacles, steep hill climbs and gravel or sand that would trap a machine with normal tires. Twin 370 motors and twin ESCs deliver forward, reverse, left/right turning and pivot (turns on the spot) .
In addition, control of the blade arm with the transmitter adds another fascinating aspect to the Blizzard. For great fun in the sand or snow, the Blizzard can
match your outdoor lifestyle and go wherever you want to go.

Kit Contents 

  • Pre-assembled chassis with control linkages complete
  • Complete printed body
  • 2.4GHz Syncro KT-431S R/C system
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • USB charger (Super plug type)
  • Binding connector
  • Tool (1.5 mm hex wrench)

Required for operation 

  • 4 x AA sized alkaline batteries for transmitter

Technical data

  • Length : 365mm
  • Width : 320mm
  • Height : 220mm
  • Motor : 370 type x 2
  • ESC KA-1571 ESC unit (S plug) ×2
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • R/C System 2.4GHz 3-ch 1-servo
298.90€  Inc Tax
Kyosho Rage 2.0 Fazer MK2 1:10 EP 4WD READY SET (K.34411T1B)

Make your R/C debut something to remember with this rough and ready monster truck
Only requires four AA-size batteries!
Nothing stands in the way of the Monster Tracker as it clears jumps and gaps in the road with ease, leaving everything behind in a trail of dust. The pickup truck body rides high and proud in true American style on tires that are big and wide, just like the country of its birth. Power over and through fields with this affordable monster truck that is built tough for carefree excitement. A one-touch hatch allows the chassis to be easily accessed for battery changes. The dust-proof radio box and diff gear case combine with break-resistant flexible resin material so in the rare event of a breakage, easy replacement and assembly provide beginners with peace of mind. Simply insert 4 x AA-size batteries (sold separately) in the transmitter and charge the battery for the chassis and this factory-assembled Readyset truck is ready to rumble. Start your R/C journey on the right track with the Monster Tracker!

●Factory assembled Readyset only requires charging the chassis battery and inclusion of four AA-size alkaline batteries (sold separately) for the transmitter.
●Includes new 2.4GHz Syncro KT-232P transmitter.
●Precision modules on differential gear realize high durability.
●Fixed length sus arms eliminate need for precision adjustment of alignment.
●Steering servo horn is equipped with servo saver to protect the servo from crash impact.
●Compatible with a wide range of optional parts for the Sand Master.


■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor 22 turn 540 type
■Weight 1900g (approx.)

Readyset Contents
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–232P transmitter
●ESC installed (forward, brake, reverse)
●Cross Wrench
●7.2V-2200mAh Ni-MH battery
●USB Charger

Required for Operation
●4 x AA size batteries for transmitter

208.62€  Inc Tax
Kyosho Outlaw Rampage 1:10 EP 2WD Truck READY SET - BLUE (K.34361T2B)

Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking.

The OUTLAW RAMPAGE brings a new dimension to R/C cars; incorporating real truck components in a 2WD scale truck. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed ‘G15’ brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80’s trophy truck style with pre-cut and painted body with decals applied. Whether it’s the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands.


●Add 4 x AA size batteries for the transmitter and charge the battery for the chassis and this factory assembled Readyset is set for action.
●Steering mechanism with slider system makes efficient use of narrow space and is easy to assemble/disassemble by connecting the ball link.
●Front bumper features 3-piece structure that protects the chassis from hard impact.
●All screws are hex type for easier maintenance.
●Newly developed 15-turn ‘G15’ brushed motor delivers high torque output characteristics.
●Pre-cut and painted body complete with decals applied recreates the image of ’70’s -’80’s trophy trucks.
●Optional LED light unit (for 2 light:No.97054-2、for 4 light:No.97054-4) can be easily installed.
●Includes 2.4GHz Syncro KT-231P+ transmitter. Features throttle endpoint and steering dual rate setting.
●Equipped with Vortex WP Brush 45A ESC that boasts a maximum continuous current of 45A.

 

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

<Ready Set Contents>
●Pre-assembled chassis installed with R/C unit
●Factory finished body with coloring and printed
●Syncro KT-231P+ transmitter
●TEAM ORION VORTEX WP Brush 45A ESC
●G15 brushed motor
●7.2V-1800 Ni-MH battery
●AC Charger
●Hex wrench
●Cross wrench

 

Required for Operation
4 x AA-size batteries for transmitter

189.71€  Inc Tax
218.38€
Kyosho Mad Crusher VE 1:8 RC 4WD READY SET EP (K.34254B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER VE incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful newly developed 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add AA-size batteries for the transmitter and a battery for the chassis and the MAD CRUSHER VE Readyset will get you straight into monster trucking action!


●Fully assembled Readyset only requires four AA-size alkaline batteries for the transmitter and battery for the chassis.
●1/8 scale Mad Force Kruiser 2.0 VE monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●KYOSHO SPEED HOUSE brushless system provides powerful performance.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis.

 

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires(F & R) φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●Battery for chassis x 1 or 2 (7.2V Ni-MH or 7.4V Li-Po)
●Charger for chassis battery

473.36€  Inc Tax
Kyosho FO-XX 2.0 1:8 RC Nitro 4WD READY SET (K.33154B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with nitro engine power system makes the 1/8 scale FO-XX 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX 2.0 makes full use of the high power & torque of the KE25SP engine on any surface, from rough roads to tarmac. In addition to the transmitter, receiver, the wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter/receiver, fuel and fuel bottle, plug heater with engine starting tools, and the dynamic performance of this factory-assembled FO-XX 2.0 Readyset is easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter/receiver and engine starting tools (fuel bottle, plug heater, fuel) to run.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differential gears provide strength to handle high power.
●A large capacity 150cc fuel tank delivers long run times.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Roof thinned just above engine’s heat sink. Allows easy work with reamer etc. for making holes for plug heater.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.

 

Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires (F & R) φ155 x 70.5mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25SP

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●Fuel bottle
●Plug heater
●Fuel

458.72€  Inc Tax
Kyosho Mad Crusher 1:8 RC Nitro 4WD READY SET (K.33153B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful KE25SP engine, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add fuel and batteries to the MAD CRUSHER Readyset and you can get straight into monster trucking action!


●Fully assembled Readyset only requires fuel and batteries.
●1/8 scale Mad Force monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●Large capacity 150cc fuel tank enables long run times.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis

 

■Length 590mm
■Width 376mm
■Height 290mm
■Wheelbase 351mm
■Tread 306mm
■Tires (F & R) φ150×70mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25 with recoil starter

 

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●Reducer for normal running
●Fuel bottle
●Plug heater
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●D-size batteries x 2 for plug heater
●Fuel

448.96€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Serpent Cobra E-Monster MT-e 1/8 4WD RTR (Ready To Race) (SER600038)
Serpent Cobra E-Monster 1/8 RTR (Ready To Race) with DTS3 transmitter

Serpent Sports introduce the 1/8 Monster Truck in a true Ready to Race version !

This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The MT-E suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long big bore shocks and long durable suspensions arms eats any terrain with ease. DragonRC 2.4 GHz digital transmitter included to manage all the power !

Box
Full color protective box to re-use for car transport or tyres.

The RTR package is really dialed:
- factory assembled racing chassis
- prepainted and precut Monster Truck body
- premounted oversized tyres/wheels/inserts
- pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long body motor (DragonRC)
- Digital 2.4ghz transmitter (DragonRC)
- Metal gear servo 17kg (DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- Spring steel transmission parts and turnbuckles, front and rear cvd driveshaft’s
- Extra large battery-cases with easy felcron straps
- Machined aluminium chassis plate
- Fully ballraced
- Batteries for the car and transmitter are not included

Serpent offers a wide variety of optional parts for this car to further improve performance, lighter or for even nicer looks.

519.72€  Inc Tax
Serpent Cobra SRX8 Truggy EP 1/8 4WD (SER600064)
Serpent Cobra SRX8 Truggy EP 1/8 4WD

After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.

599.63€  Inc Tax
Graupner Blaster XL 1/18th Scale 4WD Electric Off-Road Monster Truck RTR (GR90817)
Graupner Blaster XL 1/18th Scale 4WD Electric Off-Road Truck RTR (ready to run)

Would you like to make you a real professional at the field? Have a look at Graupner Blaster 1:18 Monster Truck RTR model. The model comes ready out of the box and thanks to the permanent all-wheel (4WD) drive offers to the driver enough traction on any surface.

Get ready for a blast of performance with Blaster 1:18 Monster Truck.

Box content:
RC380 DC electric motor
4WD drive, splash water resistant
Electronic control (ESC) and receiver in one unit
Stylish PVC body
Ball bearing differentials
Front and rear independent suspension
2.4GHz RC system
7.4V battery, 650 mAh LiIo (included)
USB charger

Specifications:
Width [mm]: 178
Height [mm]: 153
Length [mm]: 230
Weight [g]: approx. 500
Gear ratio: 1:7.69

59.78€  Inc Tax
Per Page      1 - 30 of 33