On-Road

Sort By:  
Kyosho Radio Controlled EP 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit (K.34461B)
Kyosho Radio Controlled Electric Powered 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit

Equipped with popular optional parts

This chassis kit is an optimal base for a racing vehicle

The FAZER Mk2 Readyset was created for the pure enjoyment of R/C car driving. Now available as a chassis kit, owners have the flexibility to add their own body and R/C system. Specifications have been elevated with optional parts such as HD TC center shaft S and TC universal swing shaft L to enhance the unrivaled symmetrical design and front-rear suspension balance of the lightweight chassis for R/C racers to enjoy. While the deckless design looks simple, a reduced number of components improves maintenance efficiency and optimizes torsional rigidity. Incorporation of nylon material further reduces weight and improves impact resistance. With its unique design, the FZ02 chassis embodies features and performance that will appeal to R/C drivers of all levels.

● 40% pre-assembled (shocks and diff gears are not filled with oil so assembly can be completed to preferred setting). The FZ02’s effective low center of gravity design compliments the high strength and rigidity realized through front & rear stiffeners and rib reinforcement at key sections of the chassis.
● Duralumin HD TC center shaft S (FAW209) provides increased rigidity compared to the standard resin shaft included in the Readyset. In addition to smoother driving transmission, the red anodized color has striking visual appeal.
● TC Universal swing shafts L (FAW202) on the front drive section don’t drop out on heavy contact like dog bone shafts. In addition, the swing shafts deliver consistent drive transmission even when joint is at a wide steering angle.
● A special resin transponder mounting stay is included for when the chassis is competing in race events. There is no need to make a handmade stay or holes in the body to fit a transponder.

Technical data:
● Length 375mm
● Width 200mm/190mm
● Ground clearance 8mm (approx.)
● Wheelbase 260mm
● Tread(Body width:190mm)F:164mm/R:164mm
● Tread(Body width:200mm)F:174mm/R:174mm
● Tires F: φ66mm x 25mm/R:φ66mm x 25mm
● Gear Ratio 6.54:1
● Total storage weight Approx. 1490g (with 7.4V / 4000 LiPo)

Kit contents:
● 40% pre-assembled chassis
● FAW202 TC Universal Swing Shaft S
● FAW209 HD TC Center Shaft S
● Aluminum Motor Dust Plate
● transponder mounting stay
● +0mm off-set wheel hub & M4 x 16 Wheel screw(for 190mm width body)
● +5mm off-set wheel hub & M4 x 22 Wheel screw(for 200mm width body)
● body mounts for various manufacturers bodies
● FAT701M TC Tires(M)
● Inner Sponge
● VZH003BK Wheel
● 1.5/2.0/2.5mm Hexagonal wrench
● 3/4/5/5.5/7/8mm Spanner


Required for operation:
● 2ch 1 servo R/C system for cars(Receiver size:L45xW28xH22mm or less)
● Body
● 540-550 class motor
● ESC compatible with motor used(Size:L36xW32xH23mm or less)
● Servo
● Battery charger
● Battery for chassis compatible with ESC used(SIze:L145xW47xH25mm or less)
● 4 x AA batteries for transmitter
● Damper Oil
● Grease(for Ring Gear & Diff
● Silicone OIL(for Diff
● Velvet Coating Pinion Gear No.PNGA4832 - No.PNGA4837 (for brushless motor )
● Steel Pinion Gear No.PNGS4829 - No.PNGS4836 (for brushless motor )
● Paint for polycarbonate body
● Tools

174.46€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset (K.33210B)
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

379.42€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Chevy Camaro Z28 1969 1:10 Readyset (electric) (K.34418T1B)
Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

  • “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
  • New design shaft drive full-time 4WD touring chassis(FZ02).
  • Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
  • Equipped with 2-bevel grease-filled gear diffs on front and rear.
  • Large size dog bones and cup joints realize superior reliability and durability.
  • Belt mounting battery compartment allows various battery types to be used.
  • Full ball bearings that reduce drive loss equipped throughout the drive system.
  • Features KS202W waterproof steering servo.
  • Includes completely finished body with color scheme and decals applied.
  • Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
  • Performance can be further enhanced by installing various optional parts.

TECHNICAL DATA
Length: 507mm
Width: 195mm (Body width:210mm)
Wheelbase: 260mm
Tread (F/R): F:167mm/R:167mm
Tires (F/R): F:φ64×27.7mm/R:φ64×27.7mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
R/C system: Syncro KT-231P+
Motor: G14L

Kit Contents
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Installed 60A waterproof electronic speed controller (forward/brake/reverse)
+5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw
Hexagonal wrench
Spanner

Required for Operation
4 x AA batteries for transmitter
Battery for chassis (recommended: 7.2V Ni-MH battery)
Charger for battery for chassis
Tools

Radio controlled on-road  RC car model for onroad racing and bashing.

269.62€  Inc Tax
S10 Blast TC 2 Clubracer Non-RTR (no wheels and body) - 1/10 4WD Electric Touring Car (L120202)
S10 Blast TC 2 Clubracer Non-RTR no wheels and body - 1/10 4WD Electric Radio Controlled (RC) Touring Car

The perfect basis for TC racing!
The S10 Blast TC 2 Clubracer features a specially developed 4WD chassis concept that fulfils all demands on a 1/10 4WD touring car. From the suspension to the drive, everything has been precisely adapted. Depending on the track layout, the suspension geometry can be completely adjusted.

The S10 Blast TC 2 Clubracer is a basis model ready for competition. It comes as a pre-mounted chassis without body shell, electronics and tyres.

Features
Splash-proof receiver box
Easy to understand user manual including beginner and tuning guide
Blue anodized aluminum suspension arm holder front and rear
Blue anodized aluminum motor mount
Reinforced front suspension
Low maintenance and efficient universal drivetrain
Left/right turnbuckles in front and rear
Fully adjustable onroad race suspension for perfect handling performance
Steel differentials front and rear
Swaybars front and rear for improved cornering
4 "Big Bore" oil filled shocks for perfect roadability on every surface
CVD driveshafts front for constant power transmission and minimized losses
Completely built with ball bearings
Completely sealed drive train protects the gears against stones, dirt and dust
Completely mounted chassis
All spare parts available

Technical Data
Length 414mm
Width 190mm
Height 120mm
Wheelbase 262mm
Drive system 4WD shaft drive
Gearing 48dp
Diameter of wheel 65mm
Width of wheel 24mm

89.06€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 2020 Mercedes AMG GT3 1:10 Readyset (electric) (K.34424B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 2020 Mercedes-AMG GT3 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.
●Equipped with Front and Rear light buckets compatible with optional LED Light unit which is sold separately.

Technical data:
■Length 464mm
■Width 207mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset (K.33208B)
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset (electric) (K.34415T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 486mm
■Width 200mm
■Wheelbase 274mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset (electric) (K.34423B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F:184mm/R:184mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1620g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Chevy Camaro Z28 1:10 Nitro Readyset (K.33213B)
Kyosho Radio Controlled Touring Car FW-06 Chevy Camaro Z28 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 461mm
■Width 210mm
■Height 135mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Alpine GT4 1:10 Nitro Readyset (K.33212B)
Kyosho Radio Controlled Touring Car FW-06 Alpine GT4 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 463mm
■Width 220mm
■Height 129mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) F66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 1970 Chevy Chevelle SS 1:10 Readyset (electric) (K.34416T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 1970 Chevy Chevelle SS 454 LS6 Cortez Silver 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 484mm
■Width 210mm
■Wheelbase 274mm
■Tread (F/R) F:167mm/R:167mm
■Tires (F/R) F:φ64×27.7mm/R:φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Per Page      1 - 11 of 11
  • 1