Off-Road

Sort By:  
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Orange T3 (K.33012T3B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

319.64€  Inc Tax
386.74€
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - RED (K.34108T2B)

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.


*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

  

Kit Contents 

  • Factory assembled chassis complete with control linkages
  • Finished body complete with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5、2.0、2.5、3.0mm L shaped hex wrenches
  • Cross wrench
  • 17mm wheel wrench

Required for operation 

  • 4 x AA alkaline batteries for transmitter
  • Traveling battery
  • Charger
  • Stabilized power supply
  • Phillips screwdriver (large, small)

Technical data

  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 323~328mm
  • Tread (F/R) 258mm/261mm
  • Tire (F/R) φ115×44mm/φ115×44mm
  • Gear Ratio 12.7:1
  • Weight 3,550g (approx.)
  • Transmitter 2.4GHz Syncro KT-231P+
397.72€  Inc Tax
Kyosho Inferno MP9E EVO V2 1:8 Brushless EP Buggy Readyset (K.34111B)
Kyosho Inferno MP9E EVO V2 1:8 Brushless Electric Powered Buggy Readyset

Advanced racing buggy packed with the latest design features is
ready for action almost straight out of the box

The Inferno MP9e competes at the highest level in major 1/8 scale electric buggy races around the world. To keep pace with the ever-changing race scene, continuous evolution ensures the MP9e Evo incorporates the latest racing technology. Based on the competition-level MP9e racer, this Readyset package represents excellent performance value. While maintaining the exceptional flat maneuverability and aerial control of the previous model, the new chassis layout of the MP9e realizes improved balance for even greater control. The aero body has been designed specially for this electric racing buggy to deliver critical elements such as turning, traction and rough surface performance. At the heart of the MP9e is the new KYOSHO SPEED HOUSE brushless motor and ESC. This factory-finished Readyset package contains nearly everything needed to hit the track; all you need to add is a charged battery to the chassis and batteries for the transmitter! Experience off-road racing with the one machine that will never let you down, the MP9e!

*Rib reinforced long front suspension arms from the Inferno TKI4 realize superior steering response. Front hub carriers with wider 17.5° caster angle also contribute to improved running stability.

●Fully assembled chassis with completed body in a Readyset includes everything except battery for the chassis, battery charger and batteries for the transmitter.
●Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance.
●High torque KS5031-09MW waterproof steering servo included.
●Equipped with stabilizer that reduces roll during cornering and contributes to improved steering response.
●Allows precise setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●Dust guards equipped on rear suspension arms to minimize interference with the drive system.
●Decals applied to wheels improve visibility and styling.
●Full ball bearing specifications.
●Compatible with most optional parts for the Inferno MP9.

Technical datas:
■Length  490mm
■Width  307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Gear Ratio 12.6 : 1 (gear module : 1.0)
■Weight 3400g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor

Readyset Contents:
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
●17mm wheel wrench

Required for Operation:
●4 x AA batteries for transmitter
●2 x batteries for chassis (recommended: 7.2V Ni-MH battery)
●Charger for batteries for chassis

579.50€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Kyosho Mad Crusher 1:8 RC Nitro 4WD READY SET (K.33153B)
New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful KE25SP engine, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add fuel and batteries to the MAD CRUSHER Readyset and you can get straight into monster trucking action!

●Fully assembled Readyset only requires fuel and batteries.
●1/8 scale Mad Force monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●Large capacity 150cc fuel tank enables long run times.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis

Technical Data:
Length 590mm
Width 376mm
Height 290mm
Wheelbase 351mm
Tread 306mm
Tires (F & R) φ150×70mm
Gear Ratio 25.7/19.8/15.6:1
Weight 4,200g (approx.)
Engine KE25 with recoil starter

Readyset Content:
Factory assembled chassis complete with control linkages
Pre-cut and painted body complete with decals applied
2.4GHz Syncro KT-231P+ transmitter
Reducer for normal running
Fuel bottle
Plug heater
L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
Cross wrench (large)
17mm wheel wrench

Required for Operation:
4x AA-size batteries for transmitter
4x AA-size batteries for receiver
Fuel

448.96€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Green T4 (K.33012T4B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

319.64€  Inc Tax
386.74€
Kyosho Psycho Kruiser 2.0 VE 1:8 RC 4WD Readyset EP (K.34256B)
The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-231P+ transmitter and ultra high-torque KS5031-09MW steering servo system pre-installed 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!

●3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
●Fully factory assembled Readyset.
●Pre-cut 4 color printed body.
●Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
●2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
●Includes waterproof ultra high torque KS5031-09MW steering servo.
●Incorporates many reinforced parts such as hardened main chassis.
●Features machined aluminum dial adjustable big bore shocks.
●Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
●Stabilizers and universal joints are equipped on front and rear.
●Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
●Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
●Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
●Large bumper provides protection for the front suspension holders and lower arm plate.
●Compatible with many optional parts for the Inferno series.

Technical data:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2:1
Weight: 4,650g
Motor: KSH TORX 8 - 2000kV

Readyset Content:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench

Required for Operation:
4 x AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH or 2 x 2S/3S LiPo battery)
Battery Charger

619.76€  Inc Tax
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green) (TOR9208056)
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green)

Torro RC Mini Racing Truggy Car
High speed about 25 km/h with RC Remote Control and many functions.
Automatic and patented 5-speed transmission. Comes with 20 pylons for race events.

FEATURES:
R/C Mini Racing Stunt Truggy 1/40 (green)
Remote controler with 30-40m range
Rollover protection case for hot stunts!
Ground clearance 10mm
Wheelbase 53mm
Track width 42mm
Up/down / right/left
Trim function for forward/reverse
Turbo speed of up to 25 km/h
6-10 minute drive (depending on the terrain and battery condition)
Vehicle Battery 3.7V 120 mAh LiPo
Charging time: about 40 minutes
Length: approx. 12cm
Height: approx. 5cm
Width: approx. 8.5cm
20 pylons
USB charging cable
Instruction manual

Remote control batteries required 6 x AA (not included)

Warnings:
Use under direct adult supervision only.
Minimum Age: 8 Years
Age recommendation: 14 Years
Not suitable for children under 36 months of age. Choking hazard due to small parts.

22.57€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 Truggy with Picco Rebel XL Engine (Readyset) (K.33016RXL)
Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
Comes with upgraded PICCO REBEL XL (pullstart) engine with premium polished muffler and manifold.
Maintenance-friendly chassis construction has removed the use of E-rings.
Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
Equipped with stabilizer bars on front and rear to control chassis roll through corners.
High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents:
Fully assembled chassis complete with RC linkages
Pre-cut body finished with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5, 2.0, 2.5, 3.0mm hex wrenches
Cross wrench (large)
17mm wheel wrench

Required for operation:
8 x AA-size alkaline batteries for receiver and transmitter
Engine starting tools (fuel bottle, plug heater)

Technical data:
Length : 550mm
Width : 427mm
Height : 225mm
Ground Clearance : 40mm
Wheelbase : 355mm
Tread (F/R) : 289mm / 289mm
Tire(F/R) :Φ148×66mm / Φ143×66mm
Gear Ratio :14.6:1
Weight : 3,750g approx.
Motor : Picco Rebel EXL
Transmitter 2.4GHz Syncro KT-231P+

539.85€  Inc Tax
Kyosho Nitro Tracker 1:10 RC Nitro 4WD READY SET (K.33101B)
QRC + 2-speed automatic transmission delivers mind-blowing performance! Engine-powered R/C car recreates the feeling of driving a real car.

With the rock-solid running stability of a big tire machine with wide tread, the nearly square dimensions of the Nitro Tracker produces incredible driving capability. Take this 1/10 scale off-road truck anywhere you like to enjoy the advanced high-performance mechanics of this real engine-powered R/C car, such as the QRC (Quick Reverse Clutch) that enables forward, neutral and reverse operation. The 3rd channel on the KT-231P+ transmitter operates a servo to shift the gears on the QRC to change the drive gears between Forward-Neutral-Reverse, just like a real automobile. The pre-installed powerful KE15SP engine combines with the maintenance-friendly radio box and fuel pump that sends fuel efficiently to the carburetor from the fuel tank and engine-stop lever that safely brings the engine to a stop. With this Readyset, all you need is fuel, engine starting tools, and batteries to experience the dynamic realistic performance of the awesome Nitro Tracker !

Readyset features pre-assembled 4WD chassis with shaft-driven 4 bevel gear diffs on front and rear and finished body set.
3rd channel operates the QRC system (Quick Reverse Clutch) to control forward, neutral and reverse.
2-speed transmission with adjustable shift timing makes maximum use of the KE15SP engine’s power band.
One-piece stiffener and radio box increases chassis rigidity and provides dustproof cover for receiver and battery.
Includes waterproof KS4031-06W servos for steering, throttle and shift change.
Double wishbone suspension with adjustable camber and toe angle.
Body post height can be adjusted in 2mm increments..


Kit Contents:
Completed chassis with R/C radio installed
Transmitter (KT-231P +)
Binding stick
Hex wrench (1.5mm / 2mm / 2.5mm)
Cross wrench (large)
Instruction manual
2 nylon straps (for fixing air cleaner)

Required for operation:
8 x AA batteries for transmitters and receivers
Starting tool (fuel pump, plug heater)
Glow fuel

Technical data:
Length 418.5mm 
Width 321mm 
Height 194mm 
Weight 2,650g (approx.)
Wheelbase 298.5mm
Tread (F/R) 265mm
Tires (F/R interchangeable) φ120×56mm
Gear Ratio Forward (1st) 20.9:1 / (2nd) 13.9:1
Reverse (1st) 24.1:1 / (2nd) 16.0:1
Engine KE15SP with recoil

387.96€  Inc Tax
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit (K.34110B)
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit

A star is born in the evolving electric category!
World Champion DNA runs thick in the veins of the new Inferno MP10e

With eight titles at the IFMAR (International Federation of Model Auto Racing) 1/8 scale engine racing buggy World Championships, the Inferno series boasts an unrivaled record of success. Based on the most advanced MP10 model, an electric power unit has transformed this machine to create the new MP10e! Evolution of electric motor and battery technology has delivered speed comparable with engine (GP) models so 1/8 electric racing buggies have become a competition class around the world. The quiet simplicity of electric power opens up more opportunity to enjoy high-performance 1/8 buggy performance. As various manufacturers adapted 1/8 models for competition, Kyosho optimized the weight distribution to enhance the MP10e far beyond the performance of the MP9e Evo. Boasting the performance and reliability of the MP10’s proven suspension and drive system, the MP10e features a specially designed main chassis that provides optimal chassis flex and sure-footed grip with an aerodynamic body designed for this electric model to deliver easy handling at high-speed. The motor mount is compatible with various size motors and supports the left-right distribution of the battery weight. Specially designed receiver box and ESC mount deliver improved maintenance efficiency. For the sharpest racing edge, the enhanced performance of the MP10e will be your first choice in a racing weapon.
Technical datas:
● Length 490mm
● Width 307mm
● Height 180mm
● Wheelbase 325mm (Can be changd by replacing rear hub collars
● Tread(F/R) 254mm
● Tires(F/R) (sold separately)
● Gear Ratio 10.87 : 1 Pinion 14T
● Weight 3,650g (approx.)
● R/C system 2~3ch (sold separately)

Kit Contents:
●Unassembled kit set
●Pinion gear
●Clear body
●Body mask sheet
●Decals
●Manual

Required for Operation:
● 2ch~3ch transmitter & receiver for R/C cars
● servo
● ESC
● Motor
● Tires & inners for 1/8 buggy
● Wheel
● Diff silicone oil
● Shock silicone oil
● Paint for coloring body
● Battries for chassis (2 x 2-cell LiPo) & charger *Not compatible with 4-cell battery packs
● Tools

749.69€  Inc Tax
Kyosho Inferno MP10 1:8 4WD RC Nitro Buggy KIT (K.33015B)

Optimal weight distribution and superior aerodynamics are just two of many new features designed to produce the best performing 1:8 buggy in the world. This is the KYOSHO MP10.

The pinnacle of 1:8 scale off-road buggy racing is the IFMAR (International Federation of Model Auto Racing) World Championship, won by the Kyosho INFERNO a record 8 times. The INFERNO has always been the machine against which all others are measured, and it continued as the benchmark in design and performance with the release of the MP9 in October 2008. The INFERNO has now evolved with the new MP10 to maintain its dominance at the forefront of competitive R/C racing. The culmination of 10 years of relentless R&D by designer Yuichi Kanai has resulted in a trove of data for the development of the MP10 into the strongest and most advanced 1:8 machine the RC market has ever seen. Yuichi Kanai’s MP10 embodies a virtually new design for maximum performance with the high grip tires and surfaces that are so prevalent in R/C racing, to deliver next-level performance well in excess of the MP9. The many newly-designed components provide additional strength and rigidity for increased durability and reliability: main chassis; radio plate; one-piece rear wing mount; suspension arms; suspension shafts; front and rear shock towers and more. To reach to the top of the podium, the new MP10 provides you every advantage.


Technical data

■Length 490mm
■Width 307mm
■Height 180mm
■Ground clearance 28mm
■Wheelbase 328mm(4 settings with rear hub collar position changes)
■Tread (F/R) 254mm(3 rear settings with with bush changes)
■Tires (F/R) sold separately
■Gear Ratio 11.7: 1
■Weight 3,360g (approx.)
■Engine 21 Class (sold separately)

Kit Contents

●Unassembled chassis kit
●Special clear body
●Special wheels
●Logo decals
●Window mask seal

Required for Operation

●2-channel 2-servo R/C system for cars
●21 engine
●Muffler & manifold
●Tires w/foam inserts for 1/8 buggy
●Fuel
●Fuel bottle
●Plug heater
●Starter box
●Compatible batteries for R/C system
●Shock oil
●Diff oil
●Oil for air cleaner
●Paint for car body
●Tools

689.30€  Inc Tax
Kyosho Blizzard 2.0 1:12 READY SET EP (K.34902B)

Mighty belt-tracked vehicle powers over sand, dirt and snow!
User-friendly Readyset with 2.4GHz R/C system also provides blade arm control!

Powered by two independent side-by-side motors, the transmission in the Blizzard 2.0 Readyset delivers awesome power and free control so you can enjoy dominance over any terrain like only a true belted vehicle can deliver. With a suspension system equipped on all wheels, the Blizzard clears every challenge in its path including rocky obstacles, steep hill climbs and gravel or sand that would trap a machine with normal tires. Twin 370 motors and twin ESCs deliver forward, reverse, left/right turning and pivot (turns on the spot) .
In addition, control of the blade arm with the transmitter adds another fascinating aspect to the Blizzard. For great fun in the sand or snow, the Blizzard can
match your outdoor lifestyle and go wherever you want to go.

Kit Contents 

  • Pre-assembled chassis with control linkages complete
  • Complete printed body
  • 2.4GHz Syncro KT-431S R/C system
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • USB charger (Super plug type)
  • Binding connector
  • Tool (1.5 mm hex wrench)

Required for operation 

  • 4 x AA sized alkaline batteries for transmitter

Technical data

  • Length : 365mm
  • Width : 320mm
  • Height : 220mm
  • Motor : 370 type x 2
  • ESC KA-1571 ESC unit (S plug) ×2
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • R/C System 2.4GHz 3-ch 1-servo
298.90€  Inc Tax
Kyosho Rage 2.0 Fazer MK2 1:10 EP 4WD READY SET (K.34411T1B)

Make your R/C debut something to remember with this rough and ready monster truck
Only requires four AA-size batteries!
Nothing stands in the way of the Monster Tracker as it clears jumps and gaps in the road with ease, leaving everything behind in a trail of dust. The pickup truck body rides high and proud in true American style on tires that are big and wide, just like the country of its birth. Power over and through fields with this affordable monster truck that is built tough for carefree excitement. A one-touch hatch allows the chassis to be easily accessed for battery changes. The dust-proof radio box and diff gear case combine with break-resistant flexible resin material so in the rare event of a breakage, easy replacement and assembly provide beginners with peace of mind. Simply insert 4 x AA-size batteries (sold separately) in the transmitter and charge the battery for the chassis and this factory-assembled Readyset truck is ready to rumble. Start your R/C journey on the right track with the Monster Tracker!

●Factory assembled Readyset only requires charging the chassis battery and inclusion of four AA-size alkaline batteries (sold separately) for the transmitter.
●Includes new 2.4GHz Syncro KT-232P transmitter.
●Precision modules on differential gear realize high durability.
●Fixed length sus arms eliminate need for precision adjustment of alignment.
●Steering servo horn is equipped with servo saver to protect the servo from crash impact.
●Compatible with a wide range of optional parts for the Sand Master.


■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor 22 turn 540 type
■Weight 1900g (approx.)

Readyset Contents
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–232P transmitter
●ESC installed (forward, brake, reverse)
●Cross Wrench
●7.2V-2200mAh Ni-MH battery
●USB Charger

Required for Operation
●4 x AA size batteries for transmitter

208.62€  Inc Tax
Kyosho Outlaw Rampage 1:10 EP 2WD Truck READY SET - BLUE (K.34361T2B)

Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking.

The OUTLAW RAMPAGE brings a new dimension to R/C cars; incorporating real truck components in a 2WD scale truck. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed ‘G15’ brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80’s trophy truck style with pre-cut and painted body with decals applied. Whether it’s the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands.


●Add 4 x AA size batteries for the transmitter and charge the battery for the chassis and this factory assembled Readyset is set for action.
●Steering mechanism with slider system makes efficient use of narrow space and is easy to assemble/disassemble by connecting the ball link.
●Front bumper features 3-piece structure that protects the chassis from hard impact.
●All screws are hex type for easier maintenance.
●Newly developed 15-turn ‘G15’ brushed motor delivers high torque output characteristics.
●Pre-cut and painted body complete with decals applied recreates the image of ’70’s -’80’s trophy trucks.
●Optional LED light unit (for 2 light:No.97054-2、for 4 light:No.97054-4) can be easily installed.
●Includes 2.4GHz Syncro KT-231P+ transmitter. Features throttle endpoint and steering dual rate setting.
●Equipped with Vortex WP Brush 45A ESC that boasts a maximum continuous current of 45A.

 

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

<Ready Set Contents>
●Pre-assembled chassis installed with R/C unit
●Factory finished body with coloring and printed
●Syncro KT-231P+ transmitter
●TEAM ORION VORTEX WP Brush 45A ESC
●G15 brushed motor
●7.2V-1800 Ni-MH battery
●AC Charger
●Hex wrench
●Cross wrench

 

Required for Operation
4 x AA-size batteries for transmitter

189.71€  Inc Tax
218.38€
Kyosho Mad Crusher VE 1:8 RC 4WD READY SET EP (K.34254B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER VE incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful newly developed 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add AA-size batteries for the transmitter and a battery for the chassis and the MAD CRUSHER VE Readyset will get you straight into monster trucking action!


●Fully assembled Readyset only requires four AA-size alkaline batteries for the transmitter and battery for the chassis.
●1/8 scale Mad Force Kruiser 2.0 VE monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●KYOSHO SPEED HOUSE brushless system provides powerful performance.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis.

 

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires(F & R) φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●Battery for chassis x 1 or 2 (7.2V Ni-MH or 7.4V Li-Po)
●Charger for chassis battery

473.36€  Inc Tax
Kyosho FO-XX 2.0 1:8 RC Nitro 4WD READY SET (K.33154B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with nitro engine power system makes the 1/8 scale FO-XX 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX 2.0 makes full use of the high power & torque of the KE25SP engine on any surface, from rough roads to tarmac. In addition to the transmitter, receiver, the wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter/receiver, fuel and fuel bottle, plug heater with engine starting tools, and the dynamic performance of this factory-assembled FO-XX 2.0 Readyset is easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter/receiver and engine starting tools (fuel bottle, plug heater, fuel) to run.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differential gears provide strength to handle high power.
●A large capacity 150cc fuel tank delivers long run times.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Roof thinned just above engine’s heat sink. Allows easy work with reamer etc. for making holes for plug heater.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.

 

Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires (F & R) φ155 x 70.5mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25SP

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●Fuel bottle
●Plug heater
●Fuel

458.72€  Inc Tax
Serpent Cobra SRX8 Pro Buggy GP 1/8 4WD (SER600020)
Serpent Cobra SRX8 Pro Buggy GP 1/8 4WD

When it comes to development of a product, there are no short cuts. With the intention of raising the bar, hard work and dedication is the only path to success. The SRX8 and SRX8 Evo were great cars, but here at Serpent we wanted more from this product, as bad as our customers and team drivers want to win. We raced; we tested; and repeated this process over and over until we were confident we created a better handling car that could reduce your lap times. Why you ask, because we want you to perform your best, with the least amount of effort. That’s what a great product is all about.

Sometimes in product development you do it right the first time. In this case, we did, but we learned from our mistakes. After switching to the dogbone style setup on the Evo, we heard your feedback and we reacted. So…Its back, the captured center driveline with greased joints and rubber boots. Why’s it better, well its simple, it lasts longer, has less friction and has proven to be more reliable. Aside from that it gives the car a more consistent distribution of power front to rear.

These new differentials were a topic of concern for racers of the SRX-8. The reliability and performance of the original differentials were actually pretty good. The market though has other plans for what a high quality race car must have. One of those must haves are high volume large internal gear diffs. We manned up here, and went back to the drawing board and completely re-tooled our differential approach. The internal gears are a staggering Mod 1.25 which puts them at the largest in the market place. With a maximum engagement surface on the tooth for earth shattering oil shearing, coupled with a larger volume housing, these differentials reduce any fading or loss of performance. The internal ratio is industry 10/20. Make no excuses now boys, these babies will deliver the performance when you need it most.

With the tracks reaching higher traction levels and higher speeds, the demands of more grip and stability are in hot commodity. Aerodynamics is nothing short of a way to enhance your models performance. We took our super tough and durable original wing mount design and made it taller. With an additional 15mm of height, this mount puts your wing up into “fresh “air providing even more down force as well as Lateral stability. With the additional aerodynamic gains your wing is now capable of producing you can pull the throttle harder and approach turns with even more confidence. Don’t be afraid to push it with this bad boy mounted on your new SRX-8 Pro…….

We have tested dozens of designs; this new steering system simply makes the car easier to drive or at least the feeling of it. The Ackerman plates all remain the same as before, as we felt that was really a strong point of the previous cars. The original SRX-8 steering was reliable, and so is this one. The feeling between the two is a bit different. The old system feels quicker and maybe overly responsive for some. This new system improves the feel, as it seems far more progressive so you can drive more confidently around center. The old steering system will continue to be available, if high response is something you preferred. The goal is to produce a network of options, so that you as a customer can continue to develop your setup and stay at the top of your game.

Drivability, drivability, drivability, that’s what you will find here folks. These new Inclined Caster blocks which will come in 15, 17.5 and 19 degrees, they will mate a New Inclined steering spindles. Creating these two parts together, ensures you lose none of the original Suspension Geometry as well as retains the exact track width, scrub offset and Driveshaft length. Yes, we have seen it done by other makers, but trying to slap some misfit parts together is not our intention at Serpent. It’s a do it right or not at all scenario. The parts have to be made to fit one another or your car is jacked... LOL. Seriously though, all puns aside, these new parts really smooth out the steering. They actually reduce chassis roll into the corners, which makes the car have a more stable and smooth feeling. They also decrease responsiveness around center making the car more neutral feeling. In most cases with inclined spindles, you can run less overall caster, which improves tire wear. You will find that these are the most beneficial in super high grip applications or tracks.

Adjusting your weight distribution is becoming quite popular these days. Well we are a little late to the party, but its better late than never. In any event, we have tested adding weight to the front and rear of the car, and surprisingly the affects are actually an advantage in many conditions. Whether you are looking for more front or rear end grip, now you will have the ability to add a 10, 20, or 30 gram weight to the front or rear end of your car. The weights are made from brass and will be mountable to the chassis by a countersunk screw.

599.63€  Inc Tax
Serpent Cobra Buggy Be-RTR 1/8 EP 4WD (Ready To Race) (SER600006)
Serpent Cobra Buggy Be-RTR 1/8 EP

Serpent Cobra 811 Be Buggy RTR EP 1/8 4wd

The RTR version of the successfull high end Serpent 1/8 Cobra Buggy. Complete with DragonRC 2.4 radio, metal-gear servo, brushless motor, waterproof speedo, prepainted-precut body and premounted offroad tyres 4-wheel-drive, 3 geardiffs, 16mm bigbore shocks, aluminium shock towers and chassis, easy radio box, sideguards, low battery boxes, rear wing. Fully upgradable with parts and options from the high end race-version. This super durable Buggy chassis allows a great entry in the racing scene, at a lower cost, and will make you finish your races !

Main features:
- race ready high performance electric ⅛ buggy
- expert pre-assembled and pre-set
- 4wd with cardanshafts, 3 compact ,durable geardiffs, super-easy machined alumiunium motormount, superlow longtudinal batteryboxes, compact speedo-servo mount, unique angled steeringsystem, 16mm bigbore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shocktower FR and RR, durable suspension and transmission parts, captured supension pins, the works !!
- Dragon-RC pistol type transmitter 2.4 GHz
- Dragon-RC 120A waterproof speedcontroller
- Dragon-RC powerfull 1650kv brushless sensorless motor
- Dragon-RC 10.5kg strong servo with metal gears
- Dragon-RC high grip premounted racetyres and wheels
- prepainted and precut ultra low Cobra bodyshell and large nylon rear aero-wing
- full color user manual and decalset included

Needed to complete the car:
- 4 x AA batteries for the transmitter
- 2 x Lipo hard-packs 3800 mA or more
- (charging equipment / powersupply)

429.44€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - GREEN (K.34108T1B)
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

Kit Contents 
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench

Required for operation 
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
Technical data

Length 469mm
Width 307mm
Height 189mm
Wheelbase 323~328mm
Tread (F/R) 258mm/261mm
Tire (F/R) φ115×44mm/φ115×44mm
Gear Ratio 12.7:1
Weight 3,550g (approx.)
Transmitter 2.4GHz Syncro KT-231P+

397.72€  Inc Tax
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 (white/black) - Readyset (K.32091WBK)
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 Buggy

Real racing buggy performance sits on the palm of your hand.
The perfect first or even second Radio Controlled car!

Simply add eight AAA-size alkaline batteries to this Readyset and the MINI-Z Buggy brings the fun of R/C car action. The advanced compact design includes 4WD drive train with slipper clutch to protect the gear system, and 4-wheel independent double wishbone suspension with oil-filled shocks to deliver true racing buggy performance. Most critical components are protected within the high-rigidity dustproof chassis shell. 7-stage geared steering servo provides plenty of torque for precision steering response and combines with the control program to realize the MINI-Z’s signature linear handling and light feel. The circuit board also features manual left/right volume adjustment for the optional gyro unit (sold separately) that stabilizes straight line running and improves cornering control. Modeled on the popular Inferno MP9, the MINI-Z buggy body matches performance with style featuring a distinctive new printed color scheme complimented by black wheels for the sharpest looking machine on the track. The fully pre-assembled Readyset package makes it simple and enjoyable for anyone to experience advanced R/C buggy performance, whether it’s your first car or as fun-driving second car.

Kyosho Readyset includes the Syncro KT-531P transmitter operating on FHSS 2.4GHz

  • Readyset package allows model to be enjoyed straight after purchasing batteries.
  • Fully pre-assembled chassis with printed polycarbonate body.
  • Real racing performance will please buggy owners. Great for indoor practice.
  • Includes Syncro KT-531P transmitter. Allows various setting adjustments such as steering angle.
  • FHSS 2.4GHz R/C system removes the need to manage frequency bands.
  • Frequency crystals are not required and up to 40 cars can be run at the same time.
  • Optional gyro unit set (K.MZW431) can be installed. Gyro sensitivity can be manually adjusted on the chassis.
  • Most optional parts already released for MINI-Z Buggy can be installed.


219.60€  Inc Tax
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine (SER600003R21)
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine

Serpent Cobra Buggy RTR GP 1/8 powered by Picco Rebel X .21 engine (Italian manufacturer)

Serpent now offers the Cobra 1/8 scale Buggy also in a Ready To Race version, to make this superb car even more attractive to a broader customer base, so also Hobby racers can now join in for the action. This cool Cobra RTR version includes it all. To top of an already awesome package, Serpent joined forces with Picco from Italy, to include the powerful Monster PICCO Rebel X .21 5-port offroad pullstart engine inside the Cobra !. Top quality components packed in a Ready-to-race package, the best start a Hobby-driver can make. High end racing chassis with top quality parts, impressive DragonRC 2.4 GHz transmitter with nice LCD screen and easy menu, Picco top quality engine with lots of torque and top speed and still easy to start.

Race ready high performance gas powered 1/8 scale buggy.

Expert pre-assembled and pre-set.
Includes powerfull Picco pullstart engine (made in Italy).
4wd with cardan shafts, 3 compact and durable gear diffs, 3-shoe racing clutch, machined aluminium engine mount, central low double brake system, unique angled steering system, 16mm big bore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shock tower FR and RR, 3mm heavy duty chassis plate with kick-up, durable suspension and transmission parts, captured suspension pins, the works!!
Dragon-RC pistol type transmitter 2.4 GHz with large LCD screen.
Dragon-RC 10.5kg strong servo’s with metal gears.
Dragon-RC high grip pre mounted race tyres and wheels.
DragonRC polished inline tuned pipe system.
Pre painted and precut Avenger Cobra bodyshell and large nylon rear aero-wing.
Full color user manual and decal set included.
Fully upgradable to full race spec, as all parts of the Cobra race buggy fit.

Needed to complete the car:
- 4 x AA batteries for the transmitter
- Receiver battery NiMh / LiFe / LiPo
- nitro fuel and fuel bottle
- glow plug starter

449.57€  Inc Tax
Serpent Cobra E-Monster MT-e 1/8 4WD RTR (Ready To Race) (SER600038)
Serpent Cobra E-Monster 1/8 RTR (Ready To Race) with DTS3 transmitter

Serpent Sports introduce the 1/8 Monster Truck in a true Ready to Race version !

This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The MT-E suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long big bore shocks and long durable suspensions arms eats any terrain with ease. DragonRC 2.4 GHz digital transmitter included to manage all the power !

Box
Full color protective box to re-use for car transport or tyres.

The RTR package is really dialed:
- factory assembled racing chassis
- prepainted and precut Monster Truck body
- premounted oversized tyres/wheels/inserts
- pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long body motor (DragonRC)
- Digital 2.4ghz transmitter (DragonRC)
- Metal gear servo 17kg (DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- Spring steel transmission parts and turnbuckles, front and rear cvd driveshaft’s
- Extra large battery-cases with easy felcron straps
- Machined aluminium chassis plate
- Fully ballraced
- Batteries for the car and transmitter are not included

Serpent offers a wide variety of optional parts for this car to further improve performance, lighter or for even nicer looks.

519.72€  Inc Tax
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy (SER500014)
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

339.77€  Inc Tax
Serpent Cobra SRX8 Truggy EP 1/8 4WD (SER600064)
Serpent Cobra SRX8 Truggy EP 1/8 4WD

After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.

599.63€  Inc Tax
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine (Readyset) (K.33021B)
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!

With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce, using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust, anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.

●Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
●Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
●Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●High heat dissipation from the brake disk and large capacity center differential deliver control stability, right through to the end of the race.
●Features a large capacity air cleaner that extends the maintenance cycle.
●Wide variety of optional parts provides extensive scope for performance tuning.

Technical datas:
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21SP (recoil starter installed/rear exhaust)

Kit contents:
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

Required for operations:
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

499.59€  Inc Tax
Kyosho Buggy Inferno MP9E EVO 1:8 RC 4WD Brushless EP Readyset (K.34106T1B)
Kyosho Inferno MP9E EVO 1:8 RC Brushless Electric Powered Readyset

Advanced racing buggy packed with the latest design features is
ready for action almost straight out of the box

The Inferno MP9e competes at the highest level in major 1/8 scale electric buggy races around the world. To keep pace with the ever-changing race scene, continuous evolution ensures the MP9e Evo incorporates the latest racing technology. Based on the competition-level MP9e racer, this Readyset package represents excellent performance value. While maintaining the exceptional flat maneuverability and aerial control of the previous model, the new chassis layout of the MP9e realizes improved balance for even greater control. The aero body has been designed specially for this electric racing buggy to deliver critical elements such as turning, traction and rough surface performance. At the heart of the MP9e is the new KYOSHO SPEED HOUSE brushless motor and ESC. This factory-finished Readyset package contains nearly everything needed to hit the track; all you need to add is a charged battery to the chassis and batteries for the transmitter! Experience off-road racing with the one machine that will never let you down, the MP9e!

●Fully assembled chassis with completed body in a Readyset includes everything except battery for the chassis, battery charger and batteries for the transmitter.
●Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance.
●High torque KS5031-09MW waterproof steering servo included.
●Equipped with stabilizer that reduces roll during cornering and contributes to improved steering response.
●Allows precise setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●Dust guards equipped on rear suspension arms to minimize interference with the drive system.
●Decals applied to wheels improve visibility and styling.
●Full ball bearing specifications.
●Compatible with most optional parts for the Inferno MP9.

Technical datas:
■Length  490mm
■Width  307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Gear Ratio 12.6 : 1 (gear module : 1.0)
■Weight 3400g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor

Readyset Contents:
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
●17mm wheel wrench

Required for Operation:
●4 x AA batteries for transmitter
●2 x batteries for chassis (recommended: 7.2V Ni-MH battery)
●Charger for batteries for chassis

553.88€  Inc Tax
Kyosho FO-XX VE 1:8 RC 4WD READY SET EP (K.34255B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with brushless power system makes the 1/8 scale FO-XX VE 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX VE 2.0 makes full use of the 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor on any surface, from rough roads to tarmac. In addition to the brushless motor, the speed controller, transmitter, receiver, wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX VE 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter transmitter/receiver and battery for the motor with a charger and this factory-assembled Readyset makes the dynamic performance of the FO-XX VE 2.0 easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter and chassis plus a battery charger to run.
●KYOSHO SPEED HOUSE brushless system delivers breathtaking power and performance.
●Independent left-right battery boxes suit various size batteries. Suitable for twin packs of 7.2V Ni-MH to 7.4V Li-Po batteries.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differentials incorporate steel spiral gears to meet the demands of this high power machine.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.


Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires(F & R) φ155 x 70.5mm
■Gear Ratio 8.68:1
■Weight 4,650g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation

●AA-size batteries x 4 for transmitter
●Battery for chassis x 2 (7.2V Ni-MH or 7.4V Li-Po) ※ Super Plug
●Charger for chassis battery

488.00€  Inc Tax
Kyosho Monster Tracker 2.0 1:10 READY SET - BLUE (K.34404T1B)

Make your R/C debut something to remember with this rough and ready monster truck
Only requires four AA-size batteries!
Nothing stands in the way of the Monster Tracker as it clears jumps and gaps in the road with ease, leaving everything behind in a trail of dust. The pickup truck body rides high and proud in true American style on tires that are big and wide, just like the country of its birth. Power over and through fields with this affordable monster truck that is built tough for carefree excitement. A one-touch hatch allows the chassis to be easily accessed for battery changes. The dust-proof radio box and diff gear case combine with break-resistant flexible resin material so in the rare event of a breakage, easy replacement and assembly provide beginners with peace of mind. Simply insert 4 x AA-size batteries (sold separately) in the transmitter and charge the battery for the chassis and this factory-assembled Readyset truck is ready to rumble. Start your R/C journey on the right track with the Monster Tracker!

●Factory assembled Readyset only requires charging the chassis battery and inclusion of four AA-size alkaline batteries (sold separately) for the transmitter.
●Includes new 2.4GHz Syncro KT-232P transmitter.
●Precision modules on differential gear realize high durability.
●Fixed length sus arms eliminate need for precision adjustment of alignment.
●Steering servo horn is equipped with servo saver to protect the servo from crash impact.
●Compatible with a wide range of optional parts for the Sand Master.


■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor 22 turn 540 type
■Weight 1900g (approx.)

Readyset Contents
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–232P transmitter
●ESC installed (forward, brake, reverse)
●Cross Wrench
●7.2V-2200mAh Ni-MH battery
●USB Charger

Required for Operation
●4 x AA size batteries for transmitter

158.60€  Inc Tax
Kyosho Komatsu HD785-7 1:50 RC Dump Truck READY SET (K.66003HGA)

Upgraded IRC dump truck proudly looks and moves in ultra-realism to capture the solid essence of this heavy-duty machine!

Komatsu is recognized around the world for its heavy-duty construction machinery, and Kyosho is proud to recreate the KOMATSU HD785-7 first released in February 2010, in this high-grade version. The previous model featured standard FWD and REV movement, however this HG model introduces High and Low gears for even more realistic function in addition to standard steering control and UP-DOWN control of the vessel (loading platform). The special controller with steering and lever recreates the sense of power unique to dump truck driving characteristics. The pre-painted body is immaculately finished down to fine details, making it suitable even as a display model. Three infra-red channels (A, B, & C) allow up to 3 trucks to be operated at the same time. Simply purchase standard alkaline batteries for the chassis and the controller and you can enjoy driving this fully assembled model, complete with pre-painted body. Recreate your own construction site by working the dump truck together with the 1/50 scale KOMATSU PC1250-8 (HG) hydraulic excavator of the same IRC construction machinery series.


●Fully completed, just install batteries to drive and operate.
●Special infra-red ‘IRC’ control system with special controller manages operating functions like the real machine.
●3 channels for multifunction: 1 channel for forward/reverse, 1 channel for left/right turn and 1 channel for up/down control of vessel (loading platform).
●3 Infra-red channels (A, B & C) allow 3 trucks to operate at the same time.
●Also, as the hydraulic excavator operates on different channels, 3 excavators and 3 dump trucks (maximum 6 machines) can operate at the same time.
●Detailed finish includes driver figure in the control seat, reproduced with company uniform.
●1/50 scale size with length of 210mm can be enjoyed as a display model.
●Pre-painted realistic finish is of display model standard.

*About KOMATSU HD 785-7 Dump Truck
Weight 72,300kg, length 10,290mm, width 6,885mm, height 5,050mm and a large dump truck body with a maximum loading capacity of 9,100kg. Mainly used in mining, quarries and large civil engineering works. Equipped with various elements required for a large dump truck: main frame with increased rigidity; integrated cab; VHMS (vehicle health management system); auto suspension, and electronically controlled suspension etc.

118.34€  Inc Tax
Per Page      1 - 30 of 30
  • 1