Engine Accessories

Sort By:  
Graupner Fuel Line Clamp 4mm (3 pcs.) (1123.4)
Graupner Fuel Line Clamp

Size: 4mm (3 pcs.)

Use with Neoprene/Silicone or Tygon fuel line/hose for radio controlled model engines.

1.83€  Inc Tax
Kyosho K7 Glow Plug (K.74493)
Kyosho K7 Glow Plug

For internal combustion model engines. Only the highest quality materials are used in the production of these glow plugs.

For summer season - use with 10 - 25% nitro


Use for radio controlled (RC) cars, buggies, trucks and other models.

11.59€  Inc Tax
Kyosho K4 Glow Plug (K.74491)
Kyosho K4 Glow Plug

For internal combustion model engines. Only the highest quality materials are used in the production of these glow plugs.

For winter season - use with 10 - 25% nitro


Use for radio controlled (RC) cars, buggies, trucks and other models.

7.93€  Inc Tax
Graupner Silicone Fuel Line 1m (5/2mm) - red/yellow/green (1641)
Graupner Silicone Fuel Tubing - red, yellow or green

Size: 5mm outer and 2mm inner diameter
Length: 1m

Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.

1.83€  Inc Tax
HT Rear In Line Pipe Set for 1/8 OFF-ROAD car (polished / .21) (HT-230660)
Hobby Tech Rear In Line Pipe Set

Suitable for 1/8 off-road cars
Fit most .21 (3.5cc) nitro engines
Polished finish

Package:
The set includes pipe, header, three short pipe springs, one manifold spring and two manifold gaskets.

Use this exhaust pipe set for radio controlled (RC) offroad car, buggy or truck models.

32.94€  Inc Tax
Stone Fuel Filter - For fuel line dia. 3mm (HY005-01501)
Stone Fuel Filter

Fuel Filter for use with both petrol and glow fuel.

Dimensions:
ø 13 mm x length 52 mm
Fuel in/outlet ø 5.2mm

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

4.88€  Inc Tax
Kavan Aluminum Fuel Line Plug (2 pcs) (KAV0289)
Kavan Aluminum Fuel Line Plugs.

Package: 2 pieces / d=4.10mm

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

1.83€  Inc Tax
Air Filter Dust Cover - Dirtbag (2 pcs) (R07112)
Robitronic Air Filter Cover - Dirtbag

Suitable for air filter dimensions:
Circumference: 42 - 60mm
Max. Length: 55mm

Package:
2x dust covers
2x zip ties

Use as a dust cover for internal combustion engines on 1/8 radio controlled cars and buggies (trucks and truggies)
4.88€  Inc Tax
Kyosho Muffler Gasket for .21/.28 (round type) (K.97045)
Kyosho Muffler Gasket for .21/.28 (round type)

Package: 5 pieces

Use for radio controlled (RC) offroad/onroad car models

15.86€  Inc Tax
Graupner OILIT Gasket Sheet Sealing Material (796)
Graupner OILIT Gasket Sheet / Sealing Material 

Thicknes: 0.5mm
Heat resistance: min. 400C
Sheet size: 150x105mm

Ideal material for trimming custom engine exhaust gaskets.

5.49€  Inc Tax
Kyosho HD Air Cleaner Set for .21/.25 Engine (K.92304)
Kyosho Air Filter Set for .21 and .25 engines

HD Air Cleaner Set

18.30€  Inc Tax
Stone Fuel Filter (with clip) (R07120B)
Stone Fuel Filter

Sintered Fuel Filter with attachment clip.

Dimensions:
ø 13 mm x length 52 mm

9.15€  Inc Tax
REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell) (REDMUQU0063)
REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell)

Fully Adjustable
REDS new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.

The new clutch system features a new dust-proof flywheel which has been improved compared to its previous version to protect the engine front bearing from dirt even on high-dust conditions.

The new 7075 Aluminum and Carbon clutch shoes have been redesigned to increase wear resistance. In addition, the new shoes are lighter to allow and engage at higher revs and lower inertia to rotation. V3.0 Clutch System comes with 4 alu shoes and 1.0 mm springs. Other parts are available as an upgrade.

2 different models of the V3.0 Clutch has been developed and both are available with 32mm and 34mm diameter to make it suitable for different car models.

Aluminum Clutch: medium inertia, good on all type of track layouts.
Steel Clutch: high inertia, recommended for low grip tracks.

​ Suitable for any type of car (Off-Road Buggy and Truggy)
32 mm for Kyosho, JQ, Team Associated, Hot Bodies, Serpent, Xray.
34 mm for Sworkz, Mugen, Team Losi, Agama, Tekno.

The original REDS bell can be used with all types of cars named above.

54.90€  Inc Tax
Kyosho HD Air Cleaner Sponge Set (2 pieces) (K.92304-1)
Kyosho Air Filter Sponge Set for .21 and .25 engines

HD Air Cleaner Sponge Set (2 pieces)

9.76€  Inc Tax
Kyosho Air Filter Sponge Set for KE15SP Engine (3 pieces) (K.74033-13-1)
Kyosho Air Filter Sponge Set for KE15SP Engine

Air Cleaner Sponge for .15 engines (3 pieces)

6.71€  Inc Tax
Kyosho Air Filter Set for KE15SP Engine (K.74033-13)
Kyosho Air Filter Set for KE15SP Engine

Air Cleaner Set for .15 engines

7.32€  Inc Tax
SkyRC Engine Heater (SK600066)
SkyRC Engine Heater

Fits all .19-.26 RC nitro engines
12V DC source with low voltage cutoff

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes based on ambient temperature.

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It help relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starter box. Fuel consumption is much less, as you do not have to spend time warming up and adjusting your engine. A pre-heated glow-plug will increase the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new engine. You will experience that engine pre-heating is a must. Most importantly, it will quickly pay for itself by increasing engine life and performance!

Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures without having to take the heater off.

Specification:
Input Voltage: 12V DC
Heating Power: 90W
Heating time: approx. 10 min
Low Voltage Cutoff: 9-10V
LED Indicator: Heating (red LED stays on), Low Voltage (red LED blinking)
Net Weight: 65g
Diameter: approx. 63mm
Height: approx. 50mm

28.06€  Inc Tax
Picco Buggy Turbo Glow Plug #5 - P5TH (3 pieces) (PICP5TH)
Picco Buggy Turbo Glow P5TH (off-road #5 Turbo Glow Plug, 3 pieces)

Picco glow plugs are made using the finest materials available. Keeping our race proven filament formula unchanged for many years our main target is to focus on quality.

Our high quality glow-plugs are supplied in a unique plastic box which allow you to safely store and easily access the plugs.

24.40€  Inc Tax
REDS Exhaust Pipe Gasket for 2.1 - 3.5 cc (REDGM0001)
PIPE GASKET 2.1-3.5 CC M/R SERIES (2PCS)


9.15€  Inc Tax
Spring PIPE-MANIFOLD 3.5CC short (9PC) (REDMM0003)
SPRING PIPE-MANIFOLD 3.5CC SHORT (9PC)


9.76€  Inc Tax
Racing Experience EFRA 2135 exhaust sets .21 SUPERSTRONG (NN.51135-021)
Racing Experience has introduced their new EFRA 2135 off-road exhaust set. Manufactured by Hipex the super-strong pipe was developed to offer exceptional performance especially with O.S. based engines and works great also with the 5-port Picco based propulsion. The exhaust comes as a complete set including silicone gaskets and mounting springs for as well as O.S. or Picco manifolds.

67.10€  Inc Tax
Picco EFRA 2166 Front pressure Off-road In Line polished exhaust kit .21 (Blast/P3/Rebel/OS) (PIC9397)
Picco EFRA 2166

This exhaust system is recommended for: low to medium grip tracks

The new in line exhaust kit with front pressure valve. Designed to be used with the P3X and the new P3TT .21 (3.5cc) off-road engines. The exhaust kit provides more power and good acceleration.

The best all-around pipe for 1/8 off-road buggys.
Fit most .21 (3.5cc) nitro engines (OS, Novarossi, Picco etc.)

The kit includes two medium manifold springs, three short pipe springs and two manifold gaskets.

All Picco Exhausts Systems are EFRA homologated and designed to optimize the performance of your engine.

84.79€  Inc Tax
Picco EFRA 2099 Front pressure Off-road In Line polished complete exhaust kit .21 (Picco/OS) (PIC9589)
Picco EFRA 2099

This exhaust system is recommended for: high grip tracks

For the perfect smooth and linear acceleration for off-road 1/8 cars. Kit with front pressure valve. Very linear and very good mileage. The exhaust kit provides more power and good acceleration.

Fit most .21 (3.5cc) nitro engines (OS, Novarossi, Picco etc.)

The kit includes pipe, header, two medium manifold springs, three short pipe springs and two manifold gaskets.

All Picco Exhausts Systems are EFRA homologated and designed to optimize the performance of your engine.

88.45€  Inc Tax
REDS S-Series X-ONE EFRA 2143M Off-road Tuned Pipe with M Manifold (REDKX210007)
The REDS X-ONE Torque 2143 One-Piece Off-Road Tuned Pipe for S Series engines combines the REDS 2143 Pipe and the REDS M Manifold to create this one-piece "Torque" exhaust. The X-ONE system is an innovative all-in-one pipe-manifold system. The pipe has been welded to the manifold to improve performance and fuel consumption. With X-ONE configuration there is no need for springs or gaskets, and the one piece design creates increased reliability and improved tuning stability.

POWERBAND RPM:
Low ●●●●●
Mid ●●●●●
High ●●●●


REDS Racing manifolds have been designed for different track conditions and to optimize performance.

L (Long) manifold
allows you to increase performance at low and medium RPM for a better feeling. It is recommended for high grip tracks, top speed will be lower. We advise to use this manifold with REDS 2104 pipe.

M (Medium)
is recommended for medium grip tracks where more bottom torque is required, top speed will be slightly lower.

S (Short)
is recommended for medium or low grip tracks; it is a good compromise between torque and top speed.

XS (Extra Short)
is recommended for low grip traction to achieve the highest top speed but lower bottom torque.

96.99€  Inc Tax
REDS S-Series EFRA 2143 Off-road Tuned Pipe Set with M Manifold (REDKM210011)
REDS 2143 in combination with M manifold increases runtime of about 30-40 seconds depending on the track and surface grip. Enjoy up to nine minutes of run time or more per tank with the 721 Scuderia engine and Tetra clutch system. The pipe guarantees an increase of torque up to 5%. It produces a precise throttle response in the low to mid RPM range, combine this with smooth and linear performance up to the high RPM range to produce a great power curve. We suggest to use this pipe with S line engines such as: 721 Scuderia, 721 Scuderia Gen2 and 721 Corsa.

POWERBAND RPM:
Low ●●●●●
Mid ●●●●●
High ●●●●


REDS Racing manifolds have been designed for different track conditions and to optimize performance.

L (Long) manifold
allows you to increase performance at low and medium RPM for a better feeling. It is recommended for high grip tracks, top speed will be lower. We advise to use this manifold with REDS 2104 pipe.

M (Medium)
is recommended for medium grip tracks where more bottom torque is required, top speed will be slightly lower.

S (Short)
is recommended for medium or low grip tracks; it is a good compromise between torque and top speed.

XS (Extra Short)
is recommended for low grip traction to achieve the highest top speed but lower bottom torque.

73.20€  Inc Tax
Per Page      1 - 25 of 25
  • 1