Cars & Buggies

Sort By:  
Kyosho Outlaw Rampage 1:10 EP 2WD Truck READY SET - BLUE (K.34361T2B)

Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking.

The OUTLAW RAMPAGE brings a new dimension to R/C cars; incorporating real truck components in a 2WD scale truck. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed ‘G15’ brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80’s trophy truck style with pre-cut and painted body with decals applied. Whether it’s the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands.


●Add 4 x AA size batteries for the transmitter and charge the battery for the chassis and this factory assembled Readyset is set for action.
●Steering mechanism with slider system makes efficient use of narrow space and is easy to assemble/disassemble by connecting the ball link.
●Front bumper features 3-piece structure that protects the chassis from hard impact.
●All screws are hex type for easier maintenance.
●Newly developed 15-turn ‘G15’ brushed motor delivers high torque output characteristics.
●Pre-cut and painted body complete with decals applied recreates the image of ’70’s -’80’s trophy trucks.
●Optional LED light unit (for 2 light:No.97054-2、for 4 light:No.97054-4) can be easily installed.
●Includes 2.4GHz Syncro KT-231P+ transmitter. Features throttle endpoint and steering dual rate setting.
●Equipped with Vortex WP Brush 45A ESC that boasts a maximum continuous current of 45A.

 

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

<Ready Set Contents>
●Pre-assembled chassis installed with R/C unit
●Factory finished body with coloring and printed
●Syncro KT-231P+ transmitter
●TEAM ORION VORTEX WP Brush 45A ESC
●G15 brushed motor
●7.2V-1800 Ni-MH battery
●AC Charger
●Hex wrench
●Cross wrench

 

Required for Operation
4 x AA-size batteries for transmitter

189.71€  Inc Tax
218.38€
Kyosho Mad Crusher VE 1:8 RC 4WD READY SET EP (K.34254B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER VE incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful newly developed 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add AA-size batteries for the transmitter and a battery for the chassis and the MAD CRUSHER VE Readyset will get you straight into monster trucking action!


●Fully assembled Readyset only requires four AA-size alkaline batteries for the transmitter and battery for the chassis.
●1/8 scale Mad Force Kruiser 2.0 VE monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●KYOSHO SPEED HOUSE brushless system provides powerful performance.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis.

 

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires(F & R) φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●Battery for chassis x 1 or 2 (7.2V Ni-MH or 7.4V Li-Po)
●Charger for chassis battery

473.36€  Inc Tax
Kyosho FO-XX 2.0 1:8 RC Nitro 4WD READY SET (K.33154B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with nitro engine power system makes the 1/8 scale FO-XX 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX 2.0 makes full use of the high power & torque of the KE25SP engine on any surface, from rough roads to tarmac. In addition to the transmitter, receiver, the wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter/receiver, fuel and fuel bottle, plug heater with engine starting tools, and the dynamic performance of this factory-assembled FO-XX 2.0 Readyset is easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter/receiver and engine starting tools (fuel bottle, plug heater, fuel) to run.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differential gears provide strength to handle high power.
●A large capacity 150cc fuel tank delivers long run times.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Roof thinned just above engine’s heat sink. Allows easy work with reamer etc. for making holes for plug heater.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.

 

Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires (F & R) φ155 x 70.5mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25SP

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●Fuel bottle
●Plug heater
●Fuel

458.72€  Inc Tax
Kyosho Mad Crusher 1:8 RC Nitro 4WD READY SET (K.33153B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful KE25SP engine, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add fuel and batteries to the MAD CRUSHER Readyset and you can get straight into monster trucking action!


●Fully assembled Readyset only requires fuel and batteries.
●1/8 scale Mad Force monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●Large capacity 150cc fuel tank enables long run times.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis

 

■Length 590mm
■Width 376mm
■Height 290mm
■Wheelbase 351mm
■Tread 306mm
■Tires (F & R) φ150×70mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25 with recoil starter

 

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●Reducer for normal running
●Fuel bottle
●Plug heater
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●AA-size batteries x 4 for receiver
●D-size batteries x 2 for plug heater
●Fuel

448.96€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Serpent Cobra SRX8 Pro Buggy GP 1/8 4WD (SER600020)
Serpent Cobra SRX8 Pro Buggy GP 1/8 4WD

When it comes to development of a product, there are no short cuts. With the intention of raising the bar, hard work and dedication is the only path to success. The SRX8 and SRX8 Evo were great cars, but here at Serpent we wanted more from this product, as bad as our customers and team drivers want to win. We raced; we tested; and repeated this process over and over until we were confident we created a better handling car that could reduce your lap times. Why you ask, because we want you to perform your best, with the least amount of effort. That’s what a great product is all about.

Sometimes in product development you do it right the first time. In this case, we did, but we learned from our mistakes. After switching to the dogbone style setup on the Evo, we heard your feedback and we reacted. So…Its back, the captured center driveline with greased joints and rubber boots. Why’s it better, well its simple, it lasts longer, has less friction and has proven to be more reliable. Aside from that it gives the car a more consistent distribution of power front to rear.

These new differentials were a topic of concern for racers of the SRX-8. The reliability and performance of the original differentials were actually pretty good. The market though has other plans for what a high quality race car must have. One of those must haves are high volume large internal gear diffs. We manned up here, and went back to the drawing board and completely re-tooled our differential approach. The internal gears are a staggering Mod 1.25 which puts them at the largest in the market place. With a maximum engagement surface on the tooth for earth shattering oil shearing, coupled with a larger volume housing, these differentials reduce any fading or loss of performance. The internal ratio is industry 10/20. Make no excuses now boys, these babies will deliver the performance when you need it most.

With the tracks reaching higher traction levels and higher speeds, the demands of more grip and stability are in hot commodity. Aerodynamics is nothing short of a way to enhance your models performance. We took our super tough and durable original wing mount design and made it taller. With an additional 15mm of height, this mount puts your wing up into “fresh “air providing even more down force as well as Lateral stability. With the additional aerodynamic gains your wing is now capable of producing you can pull the throttle harder and approach turns with even more confidence. Don’t be afraid to push it with this bad boy mounted on your new SRX-8 Pro…….

We have tested dozens of designs; this new steering system simply makes the car easier to drive or at least the feeling of it. The Ackerman plates all remain the same as before, as we felt that was really a strong point of the previous cars. The original SRX-8 steering was reliable, and so is this one. The feeling between the two is a bit different. The old system feels quicker and maybe overly responsive for some. This new system improves the feel, as it seems far more progressive so you can drive more confidently around center. The old steering system will continue to be available, if high response is something you preferred. The goal is to produce a network of options, so that you as a customer can continue to develop your setup and stay at the top of your game.

Drivability, drivability, drivability, that’s what you will find here folks. These new Inclined Caster blocks which will come in 15, 17.5 and 19 degrees, they will mate a New Inclined steering spindles. Creating these two parts together, ensures you lose none of the original Suspension Geometry as well as retains the exact track width, scrub offset and Driveshaft length. Yes, we have seen it done by other makers, but trying to slap some misfit parts together is not our intention at Serpent. It’s a do it right or not at all scenario. The parts have to be made to fit one another or your car is jacked... LOL. Seriously though, all puns aside, these new parts really smooth out the steering. They actually reduce chassis roll into the corners, which makes the car have a more stable and smooth feeling. They also decrease responsiveness around center making the car more neutral feeling. In most cases with inclined spindles, you can run less overall caster, which improves tire wear. You will find that these are the most beneficial in super high grip applications or tracks.

Adjusting your weight distribution is becoming quite popular these days. Well we are a little late to the party, but its better late than never. In any event, we have tested adding weight to the front and rear of the car, and surprisingly the affects are actually an advantage in many conditions. Whether you are looking for more front or rear end grip, now you will have the ability to add a 10, 20, or 30 gram weight to the front or rear end of your car. The weights are made from brass and will be mountable to the chassis by a countersunk screw.

599.63€  Inc Tax
Serpent Cobra Buggy Be-RTR 1/8 EP 4WD (Ready To Race) (SER600006)
Serpent Cobra Buggy Be-RTR 1/8 EP

Serpent Cobra 811 Be Buggy RTR EP 1/8 4wd

The RTR version of the successfull high end Serpent 1/8 Cobra Buggy. Complete with DragonRC 2.4 radio, metal-gear servo, brushless motor, waterproof speedo, prepainted-precut body and premounted offroad tyres 4-wheel-drive, 3 geardiffs, 16mm bigbore shocks, aluminium shock towers and chassis, easy radio box, sideguards, low battery boxes, rear wing. Fully upgradable with parts and options from the high end race-version. This super durable Buggy chassis allows a great entry in the racing scene, at a lower cost, and will make you finish your races !

Main features:
- race ready high performance electric ⅛ buggy
- expert pre-assembled and pre-set
- 4wd with cardanshafts, 3 compact ,durable geardiffs, super-easy machined alumiunium motormount, superlow longtudinal batteryboxes, compact speedo-servo mount, unique angled steeringsystem, 16mm bigbore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shocktower FR and RR, durable suspension and transmission parts, captured supension pins, the works !!
- Dragon-RC pistol type transmitter 2.4 GHz
- Dragon-RC 120A waterproof speedcontroller
- Dragon-RC powerfull 1650kv brushless sensorless motor
- Dragon-RC 10.5kg strong servo with metal gears
- Dragon-RC high grip premounted racetyres and wheels
- prepainted and precut ultra low Cobra bodyshell and large nylon rear aero-wing
- full color user manual and decalset included

Needed to complete the car:
- 4 x AA batteries for the transmitter
- 2 x Lipo hard-packs 3800 mA or more
- (charging equipment / powersupply)

429.44€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - GREEN (K.34108T1B)
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

Kit Contents 
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench

Required for operation 
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
Technical data

Length 469mm
Width 307mm
Height 189mm
Wheelbase 323~328mm
Tread (F/R) 258mm/261mm
Tire (F/R) φ115×44mm/φ115×44mm
Gear Ratio 12.7:1
Weight 3,550g (approx.)
Transmitter 2.4GHz Syncro KT-231P+

397.72€  Inc Tax
Mini-Z FWD Toyota Prius PHV (MA-03F/KT531P) - White pearl crystal shine (K.32423WP)

New FWD chassis introduces front wheel drive to the MINI-Z Racer Series for the first time.

To make the MR-03 Readyset even more user-friendly and appealing to more drivers, Kyosho introduces the completely new front wheel drive chassis design in the first FWD chassis of the MINI-Z Racer Series! Widely popular body styles in highly detailed body sets create the incredibly realistic MINI-Z FWD Series lineup. A newly developed transmitter delivers precise control from the optimal weight balance of the new chassis design that incorporates the proven reliability and durability of the AWD’s drive train and suspension, as well as the servo from the MR-03. In addition to the inherent straight line stability and easy steering control of front wheel drive, linear handling from the new control program on the newly designed circuit board can be further enhanced for even easier control characteristics by installing the optional gyro unit (MZW431). Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, and sponge steering wheel for comfort fit, the car has a control feeling that loses nothing to rear wheel drive MINI-Z racers. The new MINI-Z FWD presents a new way to enjoy the performance and style only the MINI-Z can deliver!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●First MINI-Z Racer chassis with front wheel drive positions the motor behind the front axle in a front midship layout.
●Newly developed Syncro KT-531P transmitter provides full range of setting adjustments.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished.
●Full ball bearing specifications include 14 bearings.
●Wheelbase can be set to M(90mm), L(94mm) and LL(98mm).
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).

■Length 165.5mm
■Width 70mm
■Height 55.0mm
■Wheelbase 98.0mm (LL)
■Chassis FWD(MA-03F)
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Pinion gears 15T, 17T, 19T, 21T
●Spur gears 27T, 29T, 31T
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons


Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

179.34€  Inc Tax
Mini-Z FWD Toyota Prius PHV (MA-03F/KT531P) - Spirited aqua metallic (K.32423BL)

New FWD chassis introduces front wheel drive to the MINI-Z Racer Series for the first time.

To make the MR-03 Readyset even more user-friendly and appealing to more drivers, Kyosho introduces the completely new front wheel drive chassis design in the first FWD chassis of the MINI-Z Racer Series! Widely popular body styles in highly detailed body sets create the incredibly realistic MINI-Z FWD Series lineup. A newly developed transmitter delivers precise control from the optimal weight balance of the new chassis design that incorporates the proven reliability and durability of the AWD’s drive train and suspension, as well as the servo from the MR-03. In addition to the inherent straight line stability and easy steering control of front wheel drive, linear handling from the new control program on the newly designed circuit board can be further enhanced for even easier control characteristics by installing the optional gyro unit (MZW431). Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, and sponge steering wheel for comfort fit, the car has a control feeling that loses nothing to rear wheel drive MINI-Z racers. The new MINI-Z FWD presents a new way to enjoy the performance and style only the MINI-Z can deliver!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●First MINI-Z Racer chassis with front wheel drive positions the motor behind the front axle in a front midship layout.
●Newly developed Syncro KT-531P transmitter provides full range of setting adjustments.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished.
●Full ball bearing specifications include 14 bearings.
●Wheelbase can be set to M(90mm), L(94mm) and LL(98mm).
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).

■Length 165.5mm
■Width 70mm
■Height 55.0mm
■Wheelbase 98.0mm (LL)
■Chassis FWD(MA-03F)
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Pinion gears 15T, 17T, 19T, 21T
●Spur gears 27T, 29T, 31T
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons


Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

179.34€  Inc Tax
Mini-Z FWD Renault Megane RS (MA-03F/KT531P) - Tonic orange (K.32421OR)

New FWD chassis introduces front wheel drive to the MINI-Z Racer Series for the first time.

To make the MR-03 Readyset even more user-friendly and appealing to more drivers, Kyosho introduces the completely new front wheel drive chassis design in the first FWD chassis of the MINI-Z Racer Series! Widely popular body styles in highly detailed body sets create the incredibly realistic MINI-Z FWD Series lineup. A newly developed transmitter delivers precise control from the optimal weight balance of the new chassis design that incorporates the proven reliability and durability of the AWD’s drive train and suspension, as well as the servo from the MR-03. In addition to the inherent straight line stability and easy steering control of front wheel drive, linear handling from the new control program on the newly designed circuit board can be further enhanced for even easier control characteristics by installing the optional gyro unit (MZW431). Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, and sponge steering wheel for comfort fit, the car has a control feeling that loses nothing to rear wheel drive MINI-Z racers. The new MINI-Z FWD presents a new way to enjoy the performance and style only the MINI-Z can deliver!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●First MINI-Z Racer chassis with front wheel drive positions the motor behind the front axle in a front midship layout.
●Newly developed Syncro KT-531P transmitter provides full range of setting adjustments.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished.
●Full ball bearing specifications include 14 bearings.
●Wheelbase can be set to M(90mm), L(94mm) and LL(98mm).
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).

■Length 165.5mm
■Width 70mm
■Height 55.0mm
■Wheelbase 98.0mm (LL)
■Chassis FWD(MA-03F)
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Pinion gears 15T, 17T, 19T, 21T
●Spur gears 27T, 29T, 31T
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons


Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

179.34€  Inc Tax
Mini-Z FWD Renault Megane RS (MA-03F/KT531P) - Sirius yellow (K.32421Y)

New FWD chassis introduces front wheel drive to the MINI-Z Racer Series for the first time.

To make the MR-03 Readyset even more user-friendly and appealing to more drivers, Kyosho introduces the completely new front wheel drive chassis design in the first FWD chassis of the MINI-Z Racer Series! Widely popular body styles in highly detailed body sets create the incredibly realistic MINI-Z FWD Series lineup. A newly developed transmitter delivers precise control from the optimal weight balance of the new chassis design that incorporates the proven reliability and durability of the AWD’s drive train and suspension, as well as the servo from the MR-03. In addition to the inherent straight line stability and easy steering control of front wheel drive, linear handling from the new control program on the newly designed circuit board can be further enhanced for even easier control characteristics by installing the optional gyro unit (MZW431). Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, and sponge steering wheel for comfort fit, the car has a control feeling that loses nothing to rear wheel drive MINI-Z racers. The new MINI-Z FWD presents a new way to enjoy the performance and style only the MINI-Z can deliver!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●First MINI-Z Racer chassis with front wheel drive positions the motor behind the front axle in a front midship layout.
●Newly developed Syncro KT-531P transmitter provides full range of setting adjustments.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished.
●Full ball bearing specifications include 14 bearings.
●Wheelbase can be set to M(90mm), L(94mm) and LL(98mm).
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).

■Length 165.5mm
■Width 70mm
■Height 55.0mm
■Wheelbase 98.0mm (LL)
■Chassis FWD(MA-03F)
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Pinion gears 15T, 17T, 19T, 21T
●Spur gears 27T, 29T, 31T
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons


Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

179.34€  Inc Tax
Mini-Z RWD Audi R8 LMS 2015 (W-MM/KT531P) - grey and red (K.32323RGB)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
SCA-1E Ford F-150 RTR (Blue) - 324mm wheelbase (CARI79868)
SCA-1E 76 Ford F-150 RTR (Blue) - 324mm wheelbase

A long wheelbase incarnation of the original SCA-1E. This is a Gen 2 RTR rig with Chassis Mounted Servo, Forward Weight Bias, Stiffer Shock Towers, True Beadlock Wheels and Soft Compound Tyres.

AN AMERICAN LEGEND
The detail of the Ford's Body is further enhanced with additional scale parts. Wing Mirrors, Windscreen Wipers, a highly detailed Grille, front and rear Bumpers, and front and rear LED Ready Lights with Lenses, all combine to produce a rig that goes way beyond most entry level RTR Trail Rigs.

THE FORD F-150
Fully Licensed by Ford, the best selling pickup in the US is faithfully reproduced by CSA using original design data and perfectly portrays this 70's Icon.

WHAT'S INCLUDED WITH THE FORD F-150 RTR?
This LWB, Gen 2 Rig offers CMS (Chassis Mounted Servo), 1.9 true Beadlock 1.9 wheels and soft compound AT-AT tyres. The fully Licensed 70's Ford F-150 body includes chromed injection moulded details and LED ready light buckets. With 2.4GHz FHSS 2-Channel Radio Gear, a 9kg Metal Geared Steering Servo, NiMH Battery and safe USB Charger included it's a complete 'Ready To Run' rig, in every sense of the word!

DIMENSIONS
Wheelbase: 324 mm
Length: 541 mm
Width: 230 mm
Skid Clearance: 75 mm

FEATURES
Highly Detailed 1976 LWB Ford F-150 Body
CMS & Forward Mounted Battery Tray
True Beadlock Wheels & Soft AT-AT Tyres
Optional Front & Rear Bumpers Included
Front CVD's & Robust Steel Driveline
High Torque Metal Geared Servo
LiPo Ready ARC-1 ESC With Crawler Mode
35 Turn Brushed Crawler Motor

IN BOX
Licensed Body Supplied Pre-Painted
RTR – Just Charge NiMH Pack & Run
2.4GHz F.H.S.S Transmitter/Receiver
NiMH Pack & Safe USB Slow Charger
Detailed Instruction Manual & Parts List
Optional LED Ready Light Buckets
4 AA Cells For Transmitter Included
Wing Mirrors Supplied Ready To Fit

349.53€  Inc Tax
SCA-1E 1981 Land Rover Range Rover Truck RTR - 285mm wheelbase (CARI80968)
SCA-1E Range Rover 81 Classic RTR - 285mm wheelbase

The 1981 Range Rover Classic includes: Forward Mounted Battery and CMS Mount, Stiffer Multi-position Shock Towers, 35T High Torque Motor, ARC-1 ESC with Crawler Mode as standard, Improved Throttle Profile, Thermal and Voltage Protection, LiPo compatibility and Waterproofing.

A BRITISH CLASSIC
The detail of the Range Rovers Body is further enhanced with additional scale parts. Wing Mirrors, Windscreen Wipers, a highly detailed Grille, front and rear Bumpers, and front and rear LED Ready Lights all combine to take this Lexan Shell to another level of realism.

THE RANGE ROVER
Fully Licensed. CSA worked closely with the Land Rover Classic Works using original design data to ensure we reproduced this iconic 4-Door Range Rover as accurately as possible.

WHAT'S INCLUDED WITH THE RANGE ROVER CLASSIC RTR?
This Gen 2 RTR Rig offers CMS (Chassis Mounted Servo), 1.9 true Beadlock 1.9 wheels and soft compound AT-AT tyres. The fully Licensed 81 Range Rover body includes injection moulded details and LED ready light buckets. With 2.4GHz FHSS 2-Channel Radio Gear, a 9kg Metal Geared Steering Servo, NiMH Battery and safe USB Charger included, it's a complete 'Ready To Run' rig, in every sense of the word!

DIMENSIONS
Wheelbase: 285 mm
Length: 480 mm
Width: 230 mm
Skid Clearance: 75 mm

FEATURES
Fully Licensed 4-Door 1981 Range Rover
CMS & Forward Mounted Battery Tray
True Beadlock Wheels & Soft AT-SS 95mm Tyres
Optional Front & Rear Bumpers Included
Multi Position Gen 2 Shock Towers
Front CVD's & Robust Steel Driveline
High Torque Metal Geared Servo
LiPo Ready ARC-1 ESC With Crawler Mode
35 Turn Brushed Crawler Motor

IN BOX
Range Rover Body Supplied Painted
RTR – Just Charge NiMH Pack & Run
2.4GHz F.H.S.S Transmitter/Receiver
NiMH Pack & Safe USB Slow Charger
Detailed Instruction Manual & Parts List
Optional LED Ready Light Buckets
4 AA Cells For Transmitter Included
Supplied With Injection Molded Body Accessories
Supplied With Decals Pre-applied

339.77€  Inc Tax
SCA-1E Coyote Truck RTR - 285mm wheelbase (CARI77768)
SCA-1E Coyote RTR - 285mm wheelbase

Based on the classic pickups of the 50's and 60's. The Coyote was our first SCA-1E release and has remained a firm favorite within the scale community ever since.

THE PERFECT STARTING POINT OF ANY SCALE ADVENTURE
The Coyote RTR is our first generation of rig. It’s not a competition design, it doesn’t have any fancy gimmicks or technology, but it is a robust, well-designed, and tested one-box solution. Just charge the pack and hit the trails. It really is as simple as that.

50'S STYLING MEETS CARISMA'S EYE FOR DETAIL
The detail of the Coyote is further enhanced with additional scale parts. Wing Mirrors, Windscreen Wipers, Door Handles, a highly detailed Grille, Front and Rear Bumpers and Front and Rear Lights with Lenses, all combine to produce a rig that goes way beyond most entry level RTR Trail Rigs.

WHAT'S INCLUDED WITH THE COYOTE RTR?
The RTR Coyote has all the features you would expect of a rig of this type. It’s based around a steel ‘C’ section ladder chassis, has a detailed 50's style truck body, and is designed to be the starting point for anyone wanting to get into this exciting a vibrant sector of RC at an affordable price. 2.4GHz FHSS 2-Channel Radio Gear, 9kg Metal Geared Steering Servo, NiMH Battery and safe Slow Charger. Its a complete 'Ready To Run' rig in every sense of the word!

DIMENSIONS
Wheelbase: 285 mm
Length: 480 mm
Width: 230 mm
Skid Clearance: 75 mm

FEATURES
Highly Detailed 50's Inspired Body
Optional Winch Ready Front Bumper
Optional Rear Bumper With Tow Hook
Soft Compound All Terrain Tyres
Front CVD's & Robust Steel Driveline
1.9 Beadlock Wheels & Foam Inserts
High Torque Metal Geared Servo
LiPo Ready ESC With Crawler Mode
35 Turn Brushed Crawler Motor

IN BOX
Coyote Body Supplied Pre-Painted
RTR – Just Charge NiMH Pack & Run
2.4GHz F.H.S.S Transmitter/Receiver
NiMH Pack & Safe USB Slow Charger
Detailed Instruction Manual & Parts List
Optional Indicator LED Light Buckets
4 AA Cells For Transmitter Included
Wing Mirrors Supplied Ready To Fit
Fully Detailed Coyote Body Supplied Painted

299.51€  Inc Tax
SCA-1E Ford F-150 RTR (Orange) - 324mm wheelbase (CARI77868)
SCA-1E 76 Ford F-150 RTR (Orange) - 324mm wheelbase

A long wheelbase incarnation of the original SCA-1E. This is a Gen 2 RTR rig with Chassis Mounted Servo, Forward Weight Bias, Stiffer Shock Towers, True Beadlock Wheels and Soft Compound Tyres.

AN AMERICAN LEGEND
The detail of the Ford's Body is further enhanced with additional scale parts. Wing Mirrors, Windscreen Wipers, a highly detailed Grille, front and rear Bumpers, and front and rear LED Ready Lights with Lenses, all combine to produce a rig that goes way beyond most entry level RTR Trail Rigs.

THE FORD F-150
Fully Licensed by Ford, the best selling pickup in the US is faithfully reproduced by CSA using original design data and perfectly portrays this 70's Icon.

WHAT'S INCLUDED WITH THE FORD F-150 RTR?
This LWB, Gen 2 Rig offers CMS (Chassis Mounted Servo), 1.9 true Beadlock 1.9 wheels and soft compound AT-AT tyres. The fully Licensed 70's Ford F-150 body includes chromed injection moulded details and LED ready light buckets. With 2.4GHz FHSS 2-Channel Radio Gear, a 9kg Metal Geared Steering Servo, NiMH Battery and safe USB Charger included it's a complete 'Ready To Run' rig, in every sense of the word!

FEATURES
Highly Detailed 1976 LWB Ford F-150 Body
CMS & Forward Mounted Battery Tray
True Beadlock Wheels & Soft AT-AT Tyres
Optional Front & Rear Bumpers Included
Front CVD's & Robust Steel Driveline
High Torque Metal Geared Servo
LiPo Ready ARC-1 ESC With Crawler Mode
35 Turn Brushed Crawler Motor

IN BOX
Licensed Body Supplied Pre-Painted
RTR – Just Charge NiMH Pack & Run
2.4GHz F.H.S.S Transmitter/Receiver
NiMH Pack & Safe USB Slow Charger
Detailed Instruction Manual & Parts List
Optional LED Ready Light Buckets
4 AA Cells For Transmitter Included
Wing Mirrors Supplied Ready To Fit

349.53€  Inc Tax
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 (white/black) - Readyset (K.32091WBK)
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 Buggy

Real racing buggy performance sits on the palm of your hand.
The perfect first or even second Radio Controlled car!

Simply add eight AAA-size alkaline batteries to this Readyset and the MINI-Z Buggy brings the fun of R/C car action. The advanced compact design includes 4WD drive train with slipper clutch to protect the gear system, and 4-wheel independent double wishbone suspension with oil-filled shocks to deliver true racing buggy performance. Most critical components are protected within the high-rigidity dustproof chassis shell. 7-stage geared steering servo provides plenty of torque for precision steering response and combines with the control program to realize the MINI-Z’s signature linear handling and light feel. The circuit board also features manual left/right volume adjustment for the optional gyro unit (sold separately) that stabilizes straight line running and improves cornering control. Modeled on the popular Inferno MP9, the MINI-Z buggy body matches performance with style featuring a distinctive new printed color scheme complimented by black wheels for the sharpest looking machine on the track. The fully pre-assembled Readyset package makes it simple and enjoyable for anyone to experience advanced R/C buggy performance, whether it’s your first car or as fun-driving second car.

Kyosho Readyset includes the Syncro KT-531P transmitter operating on FHSS 2.4GHz

  • Readyset package allows model to be enjoyed straight after purchasing batteries.
  • Fully pre-assembled chassis with printed polycarbonate body.
  • Real racing performance will please buggy owners. Great for indoor practice.
  • Includes Syncro KT-531P transmitter. Allows various setting adjustments such as steering angle.
  • FHSS 2.4GHz R/C system removes the need to manage frequency bands.
  • Frequency crystals are not required and up to 40 cars can be run at the same time.
  • Optional gyro unit set (K.MZW431) can be installed. Gyro sensitivity can be manually adjusted on the chassis.
  • Most optional parts already released for MINI-Z Buggy can be installed.


219.60€  Inc Tax
Kyosho Mini-Z Nissan Silvia K's (S13) with Aero Kit - lime green (MA020) (K.MZP431GT)
Kyosho Auto Scale Collection 1:27

Mini-Z Nissan Silvia K's (S13) with Aero Kit (lime green, MA020)

Fine hand polish. Mini-Z quality finish makes a proud collection. Display the body lineup in all its glory.

49.41€  Inc Tax
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine (SER600003R21)
Serpent Cobra Buggy B-GP 1/8 4WD RTR (Ready To Race) with Picco Rebel X .21 Engine

Serpent Cobra Buggy RTR GP 1/8 powered by Picco Rebel X .21 engine (Italian manufacturer)

Serpent now offers the Cobra 1/8 scale Buggy also in a Ready To Race version, to make this superb car even more attractive to a broader customer base, so also Hobby racers can now join in for the action. This cool Cobra RTR version includes it all. To top of an already awesome package, Serpent joined forces with Picco from Italy, to include the powerful Monster PICCO Rebel X .21 5-port offroad pullstart engine inside the Cobra !. Top quality components packed in a Ready-to-race package, the best start a Hobby-driver can make. High end racing chassis with top quality parts, impressive DragonRC 2.4 GHz transmitter with nice LCD screen and easy menu, Picco top quality engine with lots of torque and top speed and still easy to start.

Race ready high performance gas powered 1/8 scale buggy.

Expert pre-assembled and pre-set.
Includes powerfull Picco pullstart engine (made in Italy).
4wd with cardan shafts, 3 compact and durable gear diffs, 3-shoe racing clutch, machined aluminium engine mount, central low double brake system, unique angled steering system, 16mm big bore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shock tower FR and RR, 3mm heavy duty chassis plate with kick-up, durable suspension and transmission parts, captured suspension pins, the works!!
Dragon-RC pistol type transmitter 2.4 GHz with large LCD screen.
Dragon-RC 10.5kg strong servo’s with metal gears.
Dragon-RC high grip pre mounted race tyres and wheels.
DragonRC polished inline tuned pipe system.
Pre painted and precut Avenger Cobra bodyshell and large nylon rear aero-wing.
Full color user manual and decal set included.
Fully upgradable to full race spec, as all parts of the Cobra race buggy fit.

Needed to complete the car:
- 4 x AA batteries for the transmitter
- Receiver battery NiMh / LiFe / LiPo
- nitro fuel and fuel bottle
- glow plug starter

449.57€  Inc Tax
Serpent 411 Sport 1/10 4WD Kit (190mm) (SER400006)
Serpent 411 Sport 1/10 4WD Kit

Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear geardiff, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.

Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounted on a separate plate, so flex is less influenced.

Shock tower front
Black glass fibre shock tower with 3 upper shock mounting holes to choose from . Holes for an extra central body post are already made as well.

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

C-hub / steering block
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter.

Shock tower rear
Black glass fibre shock tower with 4 upper shock mounting holes to choose from . The rear body posts are mounted to the top of the rear shock tower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR

Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Motor mount
Machined aluminium motor mount / middle shaft support.

Middle shaft
Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Body mount
Front body mount is mounted through the front bumper, and the rear ones are seated on the shock tower. Multiple body position holes to choose from.

Gear-diff
Very compact ballraced gear differential in the rear, with steel gears and axles for durability. Super smooth.

Spool
Front nylon lightweight spool with screw mounted front gear pully

Transmission / belts / pullies
Smooth low friction fine pitch belts combined with optimized nylon pullies.

Driveshaft / wheel hex / wheel axle
Steel driveshafts, combined with ballraced wheel axles and nylon wheel-hex adaptors

Steering system
Steering system with optimized ackermann for neutral steering-feeling.

Shock absorbers
Latest type RCM competition shock absorbers with membranes and checked color coded race springs.

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare parts and optional parts. Decal-sheet with Serpent and 411 logo’s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optional / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optional, also fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optional section of the 411 Sport as well.

Product Type: Electric Cars > 1/10 190mm:
Class: 1/10th scale 190mm Electric
Purpose: 190mm touring car
Chassis: 2.5mm glass fibre, CNC machined
Suspension: Front C-Hub suspension system
Rear axle: Rear gear- differential
Front axle: Front nylon spool
Drive system: 4wd through 2 kevlar reinforced timing belts
Shock absorbers: RCM shock absorbers
Wheel base: 254mm +/- 4mm
Track-width front: 190mm /- 6mm
Track-width rear: 190mm /- 6mm
Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
Instructions: Full colour instruction manual, reference guide
Not included: Motor, battery, speed Controller, tires, body, radio equipment.

199.47€  Inc Tax
Serpent Cobra E-Monster MT-e 1/8 4WD RTR (Ready To Race) (SER600038)
Serpent Cobra E-Monster 1/8 RTR (Ready To Race) with DTS3 transmitter

Serpent Sports introduce the 1/8 Monster Truck in a true Ready to Race version !

This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The MT-E suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long big bore shocks and long durable suspensions arms eats any terrain with ease. DragonRC 2.4 GHz digital transmitter included to manage all the power !

Box
Full color protective box to re-use for car transport or tyres.

The RTR package is really dialed:
- factory assembled racing chassis
- prepainted and precut Monster Truck body
- premounted oversized tyres/wheels/inserts
- pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long body motor (DragonRC)
- Digital 2.4ghz transmitter (DragonRC)
- Metal gear servo 17kg (DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- Spring steel transmission parts and turnbuckles, front and rear cvd driveshaft’s
- Extra large battery-cases with easy felcron straps
- Machined aluminium chassis plate
- Fully ballraced
- Batteries for the car and transmitter are not included

Serpent offers a wide variety of optional parts for this car to further improve performance, lighter or for even nicer looks.

519.72€  Inc Tax
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy (SER500014)
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

339.77€  Inc Tax
Serpent Medius X20 '21 MID CARBON 1/10 EP (SER400037)
Serpent Medius X20 '21 MID CARBON 1/10 EP

An evolution of the original X20 Medius!

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

539.85€  Inc Tax
Serpent Medius X20 MID ALU 1/10 EP (SER400034)
Serpent Medius X20 MID ALU 1/10 EP

X20 is the result of utilizing past years design of the Eryx and 4x 1/10 touring car. The chassis is based on the popular Medius mid motor design, using a light weight and strong 1 piece motor mount concept, without any interference between the front and rear chassis flex while still allowing center flex adjustability. The advantage for this style of design is to allow maximum flex capabilities without impacting the drivetrain, meaning smoother power delivery, more consistency and less chance of stripping spurs.

439.81€  Inc Tax
Serpent Cobra SRX8 Truggy EP 1/8 4WD (SER600064)
Serpent Cobra SRX8 Truggy EP 1/8 4WD

After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.

599.63€  Inc Tax
Kyosho Inferno MP9E EVO V2 1:8 Brushless EP Buggy Readyset (K.34111B)
Kyosho Inferno MP9E EVO V2 1:8 Brushless Electric Powered Buggy Readyset

Advanced racing buggy packed with the latest design features is
ready for action almost straight out of the box

The Inferno MP9e competes at the highest level in major 1/8 scale electric buggy races around the world. To keep pace with the ever-changing race scene, continuous evolution ensures the MP9e Evo incorporates the latest racing technology. Based on the competition-level MP9e racer, this Readyset package represents excellent performance value. While maintaining the exceptional flat maneuverability and aerial control of the previous model, the new chassis layout of the MP9e realizes improved balance for even greater control. The aero body has been designed specially for this electric racing buggy to deliver critical elements such as turning, traction and rough surface performance. At the heart of the MP9e is the new KYOSHO SPEED HOUSE brushless motor and ESC. This factory-finished Readyset package contains nearly everything needed to hit the track; all you need to add is a charged battery to the chassis and batteries for the transmitter! Experience off-road racing with the one machine that will never let you down, the MP9e!

*Rib reinforced long front suspension arms from the Inferno TKI4 realize superior steering response. Front hub carriers with wider 17.5° caster angle also contribute to improved running stability.

●Fully assembled chassis with completed body in a Readyset includes everything except battery for the chassis, battery charger and batteries for the transmitter.
●Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance.
●High torque KS5031-09MW waterproof steering servo included.
●Equipped with stabilizer that reduces roll during cornering and contributes to improved steering response.
●Allows precise setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●Dust guards equipped on rear suspension arms to minimize interference with the drive system.
●Decals applied to wheels improve visibility and styling.
●Full ball bearing specifications.
●Compatible with most optional parts for the Inferno MP9.

Technical datas:
■Length  490mm
■Width  307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Gear Ratio 12.6 : 1 (gear module : 1.0)
■Weight 3400g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor

Readyset Contents:
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
●17mm wheel wrench

Required for Operation:
●4 x AA batteries for transmitter
●2 x batteries for chassis (recommended: 7.2V Ni-MH battery)
●Charger for batteries for chassis

579.50€  Inc Tax
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine (Readyset) (K.33021B)
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!

With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce, using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust, anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.

●Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
●Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
●Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●High heat dissipation from the brake disk and large capacity center differential deliver control stability, right through to the end of the race.
●Features a large capacity air cleaner that extends the maintenance cycle.
●Wide variety of optional parts provides extensive scope for performance tuning.

Technical datas:
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21SP (recoil starter installed/rear exhaust)

Kit contents:
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

Required for operations:
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

499.59€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - GREEN T4 (K.33012T4B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - ORANGE T3 (K.33012T3B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Per Page      61 - 90 of 107