Cars & Buggies

Sort By:  
Kyosho Radio Controlled EP 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit (K.34461B)
Kyosho Radio Controlled Electric Powered 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit

Equipped with popular optional parts

This chassis kit is an optimal base for a racing vehicle

The FAZER Mk2 Readyset was created for the pure enjoyment of R/C car driving. Now available as a chassis kit, owners have the flexibility to add their own body and R/C system. Specifications have been elevated with optional parts such as HD TC center shaft S and TC universal swing shaft L to enhance the unrivaled symmetrical design and front-rear suspension balance of the lightweight chassis for R/C racers to enjoy. While the deckless design looks simple, a reduced number of components improves maintenance efficiency and optimizes torsional rigidity. Incorporation of nylon material further reduces weight and improves impact resistance. With its unique design, the FZ02 chassis embodies features and performance that will appeal to R/C drivers of all levels.

● 40% pre-assembled (shocks and diff gears are not filled with oil so assembly can be completed to preferred setting). The FZ02’s effective low center of gravity design compliments the high strength and rigidity realized through front & rear stiffeners and rib reinforcement at key sections of the chassis.
● Duralumin HD TC center shaft S (FAW209) provides increased rigidity compared to the standard resin shaft included in the Readyset. In addition to smoother driving transmission, the red anodized color has striking visual appeal.
● TC Universal swing shafts L (FAW202) on the front drive section don’t drop out on heavy contact like dog bone shafts. In addition, the swing shafts deliver consistent drive transmission even when joint is at a wide steering angle.
● A special resin transponder mounting stay is included for when the chassis is competing in race events. There is no need to make a handmade stay or holes in the body to fit a transponder.

Technical data:
● Length 375mm
● Width 200mm/190mm
● Ground clearance 8mm (approx.)
● Wheelbase 260mm
● Tread(Body width:190mm)F:164mm/R:164mm
● Tread(Body width:200mm)F:174mm/R:174mm
● Tires F: φ66mm x 25mm/R:φ66mm x 25mm
● Gear Ratio 6.54:1
● Total storage weight Approx. 1490g (with 7.4V / 4000 LiPo)

Kit contents:
● 40% pre-assembled chassis
● FAW202 TC Universal Swing Shaft S
● FAW209 HD TC Center Shaft S
● Aluminum Motor Dust Plate
● transponder mounting stay
● +0mm off-set wheel hub & M4 x 16 Wheel screw(for 190mm width body)
● +5mm off-set wheel hub & M4 x 22 Wheel screw(for 200mm width body)
● body mounts for various manufacturers bodies
● FAT701M TC Tires(M)
● Inner Sponge
● VZH003BK Wheel
● 1.5/2.0/2.5mm Hexagonal wrench
● 3/4/5/5.5/7/8mm Spanner


Required for operation:
● 2ch 1 servo R/C system for cars(Receiver size:L45xW28xH22mm or less)
● Body
● 540-550 class motor
● ESC compatible with motor used(Size:L36xW32xH23mm or less)
● Servo
● Battery charger
● Battery for chassis compatible with ESC used(SIze:L145xW47xH25mm or less)
● 4 x AA batteries for transmitter
● Damper Oil
● Grease(for Ring Gear & Diff
● Silicone OIL(for Diff
● Velvet Coating Pinion Gear No.PNGA4832 - No.PNGA4837 (for brushless motor )
● Steel Pinion Gear No.PNGS4829 - No.PNGS4836 (for brushless motor )
● Paint for polycarbonate body
● Tools

174.46€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset (K.33210B)
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

379.42€  Inc Tax
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine (Readyset) (K.33021B)
Kyosho Inferno MP9 TKI4 V2 1:8 Nitro Buggy with KE21SP Engine

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!

With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce, using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust, anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.

●Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
●Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
●Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●High heat dissipation from the brake disk and large capacity center differential deliver control stability, right through to the end of the race.
●Features a large capacity air cleaner that extends the maintenance cycle.
●Wide variety of optional parts provides extensive scope for performance tuning.

Technical datas:
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21SP (recoil starter installed/rear exhaust)

Kit contents:
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

Required for operations:
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

519.72€  Inc Tax
Kyosho Blizzard 2.0 1:12 READY SET EP (K.34902B)

Mighty belt-tracked vehicle powers over sand, dirt and snow!
User-friendly Readyset with 2.4GHz R/C system also provides blade arm control!

Powered by two independent side-by-side motors, the transmission in the Blizzard 2.0 Readyset delivers awesome power and free control so you can enjoy dominance over any terrain like only a true belted vehicle can deliver. With a suspension system equipped on all wheels, the Blizzard clears every challenge in its path including rocky obstacles, steep hill climbs and gravel or sand that would trap a machine with normal tires. Twin 370 motors and twin ESCs deliver forward, reverse, left/right turning and pivot (turns on the spot) .
In addition, control of the blade arm with the transmitter adds another fascinating aspect to the Blizzard. For great fun in the sand or snow, the Blizzard can
match your outdoor lifestyle and go wherever you want to go.

Kit Contents 

  • Pre-assembled chassis with control linkages complete
  • Complete printed body
  • 2.4GHz Syncro KT-431S R/C system
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • USB charger (Super plug type)
  • Binding connector
  • Tool (1.5 mm hex wrench)

Required for operation 

  • 4 x AA sized alkaline batteries for transmitter

Technical data

  • Length : 365mm
  • Width : 320mm
  • Height : 220mm
  • Motor : 370 type x 2
  • ESC KA-1571 ESC unit (S plug) ×2
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • R/C System 2.4GHz 3-ch 1-servo
298.90€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Orange T3 (K.33012T3B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - RED (K.34108T2B)

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.


*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

  

Kit Contents 

  • Factory assembled chassis complete with control linkages
  • Finished body complete with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5、2.0、2.5、3.0mm L shaped hex wrenches
  • Cross wrench
  • 17mm wheel wrench

Required for operation 

  • 4 x AA alkaline batteries for transmitter
  • Traveling battery
  • Charger
  • Stabilized power supply
  • Phillips screwdriver (large, small)

Technical data

  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 323~328mm
  • Tread (F/R) 258mm/261mm
  • Tire (F/R) φ115×44mm/φ115×44mm
  • Gear Ratio 12.7:1
  • Weight 3,550g (approx.)
  • Transmitter 2.4GHz Syncro KT-231P+
397.72€  Inc Tax
Kyosho Inferno MP9E EVO V2 1:8 Brushless EP Buggy Readyset (K.34111B)
Kyosho Inferno MP9E EVO V2 1:8 Brushless Electric Powered Buggy Readyset

Advanced racing buggy packed with the latest design features is
ready for action almost straight out of the box

The Inferno MP9e competes at the highest level in major 1/8 scale electric buggy races around the world. To keep pace with the ever-changing race scene, continuous evolution ensures the MP9e Evo incorporates the latest racing technology. Based on the competition-level MP9e racer, this Readyset package represents excellent performance value. While maintaining the exceptional flat maneuverability and aerial control of the previous model, the new chassis layout of the MP9e realizes improved balance for even greater control. The aero body has been designed specially for this electric racing buggy to deliver critical elements such as turning, traction and rough surface performance. At the heart of the MP9e is the new KYOSHO SPEED HOUSE brushless motor and ESC. This factory-finished Readyset package contains nearly everything needed to hit the track; all you need to add is a charged battery to the chassis and batteries for the transmitter! Experience off-road racing with the one machine that will never let you down, the MP9e!

*Rib reinforced long front suspension arms from the Inferno TKI4 realize superior steering response. Front hub carriers with wider 17.5° caster angle also contribute to improved running stability.

●Fully assembled chassis with completed body in a Readyset includes everything except battery for the chassis, battery charger and batteries for the transmitter.
●Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance.
●High torque KS5031-09MW waterproof steering servo included.
●Equipped with stabilizer that reduces roll during cornering and contributes to improved steering response.
●Allows precise setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
●Dust guards equipped on rear suspension arms to minimize interference with the drive system.
●Decals applied to wheels improve visibility and styling.
●Full ball bearing specifications.
●Compatible with most optional parts for the Inferno MP9.

Technical datas:
■Length  490mm
■Width  307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Gear Ratio 12.6 : 1 (gear module : 1.0)
■Weight 3400g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor

Readyset Contents:
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
●17mm wheel wrench

Required for Operation:
●4 x AA batteries for transmitter
●2 x batteries for chassis (recommended: 7.2V Ni-MH battery)
●Charger for batteries for chassis

579.50€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Chevy Camaro Z28 1969 1:10 Readyset (electric) (K.34418T1B)
Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

  • “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
  • New design shaft drive full-time 4WD touring chassis(FZ02).
  • Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
  • Equipped with 2-bevel grease-filled gear diffs on front and rear.
  • Large size dog bones and cup joints realize superior reliability and durability.
  • Belt mounting battery compartment allows various battery types to be used.
  • Full ball bearings that reduce drive loss equipped throughout the drive system.
  • Features KS202W waterproof steering servo.
  • Includes completely finished body with color scheme and decals applied.
  • Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
  • Performance can be further enhanced by installing various optional parts.

TECHNICAL DATA
Length: 507mm
Width: 195mm (Body width:210mm)
Wheelbase: 260mm
Tread (F/R): F:167mm/R:167mm
Tires (F/R): F:φ64×27.7mm/R:φ64×27.7mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
R/C system: Syncro KT-231P+
Motor: G14L

Kit Contents
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Installed 60A waterproof electronic speed controller (forward/brake/reverse)
+5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw
Hexagonal wrench
Spanner

Required for Operation
4 x AA batteries for transmitter
Battery for chassis (recommended: 7.2V Ni-MH battery)
Charger for battery for chassis
Tools

Radio controlled on-road  RC car model for onroad racing and bashing.

269.62€  Inc Tax
S10 Blast TC 2 Clubracer Non-RTR (no wheels and body) - 1/10 4WD Electric Touring Car (L120202)
S10 Blast TC 2 Clubracer Non-RTR no wheels and body - 1/10 4WD Electric Radio Controlled (RC) Touring Car

The perfect basis for TC racing!
The S10 Blast TC 2 Clubracer features a specially developed 4WD chassis concept that fulfils all demands on a 1/10 4WD touring car. From the suspension to the drive, everything has been precisely adapted. Depending on the track layout, the suspension geometry can be completely adjusted.

The S10 Blast TC 2 Clubracer is a basis model ready for competition. It comes as a pre-mounted chassis without body shell, electronics and tyres.

Features
Splash-proof receiver box
Easy to understand user manual including beginner and tuning guide
Blue anodized aluminum suspension arm holder front and rear
Blue anodized aluminum motor mount
Reinforced front suspension
Low maintenance and efficient universal drivetrain
Left/right turnbuckles in front and rear
Fully adjustable onroad race suspension for perfect handling performance
Steel differentials front and rear
Swaybars front and rear for improved cornering
4 "Big Bore" oil filled shocks for perfect roadability on every surface
CVD driveshafts front for constant power transmission and minimized losses
Completely built with ball bearings
Completely sealed drive train protects the gears against stones, dirt and dust
Completely mounted chassis
All spare parts available

Technical Data
Length 414mm
Width 190mm
Height 120mm
Wheelbase 262mm
Drive system 4WD shaft drive
Gearing 48dp
Diameter of wheel 65mm
Width of wheel 24mm

89.06€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Green T4 (K.33012T4B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Kyosho Psycho Kruiser 2.0 VE 1:8 RC 4WD Readyset EP (K.34256B)
The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-231P+ transmitter and ultra high-torque KS5031-09MW steering servo system pre-installed 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!

●3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
●Fully factory assembled Readyset.
●Pre-cut 4 color printed body.
●Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
●2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
●Includes waterproof ultra high torque KS5031-09MW steering servo.
●Incorporates many reinforced parts such as hardened main chassis.
●Features machined aluminum dial adjustable big bore shocks.
●Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
●Stabilizers and universal joints are equipped on front and rear.
●Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
●Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
●Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
●Large bumper provides protection for the front suspension holders and lower arm plate.
●Compatible with many optional parts for the Inferno series.

Technical data:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2:1
Weight: 4,650g
Motor: KSH TORX 8 - 2000kV

Readyset Content:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench

Required for Operation:
4 x AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH or 2 x 2S/3S LiPo battery)
Battery Charger

619.76€  Inc Tax
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green) (TOR9208056)
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green)

Torro RC Mini Racing Truggy Car
High speed about 25 km/h with RC Remote Control and many functions.
Automatic and patented 5-speed transmission. Comes with 20 pylons for race events.

FEATURES:
R/C Mini Racing Stunt Truggy 1/40 (green)
Remote controler with 30-40m range
Rollover protection case for hot stunts!
Ground clearance 10mm
Wheelbase 53mm
Track width 42mm
Up/down / right/left
Trim function for forward/reverse
Turbo speed of up to 25 km/h
6-10 minute drive (depending on the terrain and battery condition)
Vehicle Battery 3.7V 120 mAh LiPo
Charging time: about 40 minutes
Length: approx. 12cm
Height: approx. 5cm
Width: approx. 8.5cm
20 pylons
USB charging cable
Instruction manual

Remote control batteries required 6 x AA (not included)

Warnings:
Use under direct adult supervision only.
Minimum Age: 8 Years
Age recommendation: 14 Years
Not suitable for children under 36 months of age. Choking hazard due to small parts.

22.57€  Inc Tax
Kyosho Inferno NEO ST 3.0 1:8 Truggy with Picco Rebel XL Engine (Readyset) (K.33016RXL)
Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
Comes with upgraded PICCO REBEL XL (pullstart) engine with premium polished muffler and manifold.
Maintenance-friendly chassis construction has removed the use of E-rings.
Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
Equipped with stabilizer bars on front and rear to control chassis roll through corners.
High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents:
Fully assembled chassis complete with RC linkages
Pre-cut body finished with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5, 2.0, 2.5, 3.0mm hex wrenches
Cross wrench (large)
17mm wheel wrench

Required for operation:
8 x AA-size alkaline batteries for receiver and transmitter
Engine starting tools (fuel bottle, plug heater)

Technical data:
Length : 550mm
Width : 427mm
Height : 225mm
Ground Clearance : 40mm
Wheelbase : 355mm
Tread (F/R) : 289mm / 289mm
Tire(F/R) :Φ148×66mm / Φ143×66mm
Gear Ratio :14.6:1
Weight : 3,750g approx.
Motor : Picco Rebel EXL
Transmitter 2.4GHz Syncro KT-231P+

539.85€  Inc Tax
Kyosho Nitro Tracker 1:10 RC Nitro 4WD READY SET (K.33101B)
QRC + 2-speed automatic transmission delivers mind-blowing performance! Engine-powered R/C car recreates the feeling of driving a real car.

With the rock-solid running stability of a big tire machine with wide tread, the nearly square dimensions of the Nitro Tracker produces incredible driving capability. Take this 1/10 scale off-road truck anywhere you like to enjoy the advanced high-performance mechanics of this real engine-powered R/C car, such as the QRC (Quick Reverse Clutch) that enables forward, neutral and reverse operation. The 3rd channel on the KT-231P+ transmitter operates a servo to shift the gears on the QRC to change the drive gears between Forward-Neutral-Reverse, just like a real automobile. The pre-installed powerful KE15SP engine combines with the maintenance-friendly radio box and fuel pump that sends fuel efficiently to the carburetor from the fuel tank and engine-stop lever that safely brings the engine to a stop. With this Readyset, all you need is fuel, engine starting tools, and batteries to experience the dynamic realistic performance of the awesome Nitro Tracker !

Readyset features pre-assembled 4WD chassis with shaft-driven 4 bevel gear diffs on front and rear and finished body set.
3rd channel operates the QRC system (Quick Reverse Clutch) to control forward, neutral and reverse.
2-speed transmission with adjustable shift timing makes maximum use of the KE15SP engine’s power band.
One-piece stiffener and radio box increases chassis rigidity and provides dustproof cover for receiver and battery.
Includes waterproof KS4031-06W servos for steering, throttle and shift change.
Double wishbone suspension with adjustable camber and toe angle.
Body post height can be adjusted in 2mm increments..


Kit Contents:
Completed chassis with R/C radio installed
Transmitter (KT-231P +)
Binding stick
Hex wrench (1.5mm / 2mm / 2.5mm)
Cross wrench (large)
Instruction manual
2 nylon straps (for fixing air cleaner)

Required for operation:
8 x AA batteries for transmitters and receivers
Starting tool (fuel pump, plug heater)
Glow fuel

Technical data:
Length 418.5mm 
Width 321mm 
Height 194mm 
Weight 2,650g (approx.)
Wheelbase 298.5mm
Tread (F/R) 265mm
Tires (F/R interchangeable) φ120×56mm
Gear Ratio Forward (1st) 20.9:1 / (2nd) 13.9:1
Reverse (1st) 24.1:1 / (2nd) 16.0:1
Engine KE15SP with recoil

387.96€  Inc Tax
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit (K.34110B)
Kyosho Inferno MP10E 1:8 4WD RC EP Buggy Kit

A star is born in the evolving electric category!
World Champion DNA runs thick in the veins of the new Inferno MP10e

With eight titles at the IFMAR (International Federation of Model Auto Racing) 1/8 scale engine racing buggy World Championships, the Inferno series boasts an unrivaled record of success. Based on the most advanced MP10 model, an electric power unit has transformed this machine to create the new MP10e! Evolution of electric motor and battery technology has delivered speed comparable with engine (GP) models so 1/8 electric racing buggies have become a competition class around the world. The quiet simplicity of electric power opens up more opportunity to enjoy high-performance 1/8 buggy performance. As various manufacturers adapted 1/8 models for competition, Kyosho optimized the weight distribution to enhance the MP10e far beyond the performance of the MP9e Evo. Boasting the performance and reliability of the MP10’s proven suspension and drive system, the MP10e features a specially designed main chassis that provides optimal chassis flex and sure-footed grip with an aerodynamic body designed for this electric model to deliver easy handling at high-speed. The motor mount is compatible with various size motors and supports the left-right distribution of the battery weight. Specially designed receiver box and ESC mount deliver improved maintenance efficiency. For the sharpest racing edge, the enhanced performance of the MP10e will be your first choice in a racing weapon.
Technical datas:
● Length 490mm
● Width 307mm
● Height 180mm
● Wheelbase 325mm (Can be changd by replacing rear hub collars
● Tread(F/R) 254mm
● Tires(F/R) (sold separately)
● Gear Ratio 10.87 : 1 Pinion 14T
● Weight 3,650g (approx.)
● R/C system 2~3ch (sold separately)

Kit Contents:
●Unassembled kit set
●Pinion gear
●Clear body
●Body mask sheet
●Decals
●Manual

Required for Operation:
● 2ch~3ch transmitter & receiver for R/C cars
● servo
● ESC
● Motor
● Tires & inners for 1/8 buggy
● Wheel
● Diff silicone oil
● Shock silicone oil
● Paint for coloring body
● Battries for chassis (2 x 2-cell LiPo) & charger *Not compatible with 4-cell battery packs
● Tools

749.69€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 2020 Mercedes AMG GT3 1:10 Readyset (electric) (K.34424B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 2020 Mercedes-AMG GT3 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.
●Equipped with Front and Rear light buckets compatible with optional LED Light unit which is sold separately.

Technical data:
■Length 464mm
■Width 207mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset (K.33208B)
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Mini-Z RWD Chevrolet Corvette ZR1 (W-MM/KT531P + LEDs) - Sebring Orange (K.32334OR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
Front and rear LED lights for body shell
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Mini-Z MA030 EVO Chassis Set (AWD - 8500KV) (K.32180B)

New AWD chassis set with separate receiver unit to use with your choice of transmitter joins the EVO series lineup!

The new AWD model MA-030EVO, based on the FWD MA-03F chassis, can use the separate receiver unit pioneered on the MR-03EVO (sold separately)

The MINI-Z was originally designed with an integrated receiver, servo and speed controller, however on the MR-030EVO the receiver was designed to be purchased and installed as a separate unit to allow the model to be used with other makes of transmitter such as KYOSHO (KT18/EX-6/EX-6R/KT-531P/KT-432PT), KO (EX-2/EX-RR), Futaba (T7PX/T7XC/T4PM), Flysky (Noble NB4). In addition, the highest AWD series spec MA-020VE PRO included a 3-stage steering servo unit, but the new MA-030EVO includes the even higher spec 5-stage gear type from the MR-03. Also, a special CPU for servo control improves the control speed of positioning feedback and the updated control program delivers the best steering feel of any AWD model through improved responsiveness and linear response to driver control. The one-piece heatsink and aluminum case on the KYOSHO SPEED HOUSE XSPEED 85 (8500KV) brushless motor keeps it cool for optimal performance. The I.C.S. manager allows precision setting adjustments and also the switch to a brushed motor, which was not possible with previous chassis sets. Switch between drift and grip driving styles to experience the ultimate in AWD driving performance.


●MA-030 AWD chassis is based on MINI-Z FWD MA-03F chassis.
●Chassis set comes with separate ESC and receiver unit.
●Includes KYOSHO SPEED HOUSE 85 brushless motor (KV8500).
●I.C.S manager enables precise setting control and use of either brushless or brushed motor.
●Independent CPU control with increased processing speed delivers even more precise control.
●Full ball bearing specifications reduces drive loss.
●Includes rear double wishbone suspension.
●Compatible with L(94mm) and LL(98mm) wheelbases. Only LL(98mm) can be used with rear double wishbone suspension set.
●Compatible with optional parts for the various MR-03F chassis models

229.36€  Inc Tax
Mini-Z RWD Chevrolet Camaro ZL1 1LE (W-MM/KT531P + LEDs) - Red hot (K.32339R)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
Front and rear LED lights for body shell
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Mini-Z RWD Chevrolet Camaro ZL1 1LE (W-MM/KT531P + LEDs) - Summit white (K.32339W)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
Front and rear LED lights for body shell
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Mini-Z RWD Ferrari La Ferrari (W-MM/KT531P) - red (K.32320-224R)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Mini-Z FWD Honda Civic Type R (MA-03F/KT531P) - white (K.32424W)

New FWD chassis introduces front wheel drive to the MINI-Z Racer Series for the first time.

To make the MR-03 Readyset even more user-friendly and appealing to more drivers, Kyosho introduces the completely new front wheel drive chassis design in the first FWD chassis of the MINI-Z Racer Series! Widely popular body styles in highly detailed body sets create the incredibly realistic MINI-Z FWD Series lineup. A newly developed transmitter delivers precise control from the optimal weight balance of the new chassis design that incorporates the proven reliability and durability of the AWD’s drive train and suspension, as well as the servo from the MR-03. In addition to the inherent straight line stability and easy steering control of front wheel drive, linear handling from the new control program on the newly designed circuit board can be further enhanced for even easier control characteristics by installing the optional gyro unit (MZW431). Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, and sponge steering wheel for comfort fit, the car has a control feeling that loses nothing to rear wheel drive MINI-Z racers. The new MINI-Z FWD presents a new way to enjoy the performance and style only the MINI-Z can deliver!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●First MINI-Z Racer chassis with front wheel drive positions the motor behind the front axle in a front midship layout.
●Newly developed Syncro KT-531P transmitter provides full range of setting adjustments.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished.
●Full ball bearing specifications include 14 bearings.
●Wheelbase can be set to M(90mm), L(94mm) and LL(98mm).
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).

■Length 165.5mm
■Width 70mm
■Height 55.0mm
■Wheelbase 98.0mm (LL)
■Chassis FWD(MA-03F)
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Pinion gears 15T, 17T, 19T, 21T
●Spur gears 27T, 29T, 31T
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons


Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

218.38€  Inc Tax
Mini-Z RWD Audi R8 LMS 2015 (W-MM/KT531P) - black and red (K.32323BKR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Mini-Z RWD McLaren P1 GTR (W-MM/KT531P) - white and red (K.32324WR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

189.10€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset (electric) (K.34415T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 486mm
■Width 200mm
■Wheelbase 274mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset (electric) (K.34423B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F:184mm/R:184mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1620g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Mad Crusher VE 1:8 RC 4WD READY SET EP (K.34254B)

New monster machine dominates the roughest roads in style with scale truck body and 5-link suspension.

Let the might and power of this monster machine inspire you with its dominant presence and performance over the toughest terrain. Get the adrenalin pumping by tearing around wide-open spaces at full throttle as you wreak true R/C truck mayhem! Based on the heavy-duty Mad Force Cruiser chassis, the new MAD CRUSHER VE incorporates a newly developed 5-link suspension system featuring ball joint upper and lower links in combination with lateral rods that deliver the deeper, supple stroke, more characteristic of rock crawlers. Equipped with the powerful newly developed 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor, you can ride roughshod over any surface from tarmac to off-road in ‘70s American pick-up truck style with realistic scale wheels and tires. Simply add AA-size batteries for the transmitter and a battery for the chassis and the MAD CRUSHER VE Readyset will get you straight into monster trucking action!


●Fully assembled Readyset only requires four AA-size alkaline batteries for the transmitter and battery for the chassis.
●1/8 scale Mad Force Kruiser 2.0 VE monster truck chassis base incorporates new 5-link suspension.
●Pre-cut and painted scale body complete with decals applied recreates the 70’s American truck style.
●Rigid axles on front and rear with solid casing effectively transfer power into traction.
●Diff gears incorporate steel spiral gears on front and rear to handle high power loads.
●KYOSHO SPEED HOUSE brushless system provides powerful performance.
●Includes Syncro KT-231P+ transmitter and Syncro KR-331 receiver with failsafe function.
●Receiver and battery are stored in radio box for protection against shocks and dirt.
●Waterproof high-torque KS5031-09MW steering servo incorporates metal gears for reliable control of the big chassis.

 

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires(F & R) φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

Readyset Contents
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation
●AA-size batteries x 4 for transmitter
●Battery for chassis x 1 or 2 (7.2V Ni-MH or 7.4V Li-Po)
●Charger for chassis battery

473.36€  Inc Tax
Kyosho Inferno NEO 3.0VE 1:8 RC Brushless EP READY SET - GREEN (K.34108T1B)
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE  allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

Kit Contents 
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench

Required for operation 
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
Technical data

Length 469mm
Width 307mm
Height 189mm
Wheelbase 323~328mm
Tread (F/R) 258mm/261mm
Tire (F/R) φ115×44mm/φ115×44mm
Gear Ratio 12.7:1
Weight 3,550g (approx.)
Transmitter 2.4GHz Syncro KT-231P+

397.72€  Inc Tax
Per Page      1 - 30 of 42