Foxy

Sort By:  
FOXY G3 Brushless Motor C2808-1200kv (3BL2655)
FOXY G3 C2808-1200

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2808-1200 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2808-1200 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3530; The marking according to the stator dimensions: C2808

Specifications:
No. of (LiXX) cells: 2-4
Motor Kv: 1200 rpm/V
Max power (30s/4S Lipo): 300W
No-load current (2S): 0.9A
Max peak current (30s): 27A
Diameter: 35mm
Length: 30mm
Shaft diameter: 4mm
Weight: 90g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 35-40A

Application:
Gliders up to: 1200g
Trainers up to: 1000g
Acro planes up to: 850g
3D airplanes up to: 750g

Recommended propellers:
3S: 10X5”
4S: 8X5”

26.23€  Inc Tax
Foxy Indoor Propeller 11x5" (2VRP1105I)
Foxy indoor line of propellers made of tough plastic designed for Slow-Flyers, Park-Flyers and all other slow flying model airplanes with electric motor. Avaliable in diameter from 3" to 11".

Dimension: 11x5" (28x12.5cm)

Prop screw diameter: 6mm

3.90€  Inc Tax
FOXY Wooden Propeller 15x10 (1VR1510)
FOXY Wooden Propellers

Dimension: 15x10

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

12.20€  Inc Tax
FOXY Wooden Propeller 18x8 (1VR1808)
FOXY Wooden Propellers

Dimension: 18x8

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

16.47€  Inc Tax
FOXY Pro Propeller 13x7 (2VRP1307P)
Designed for airplanes with combustion engine.

Features:
Made of high strength polyamid, 50% filled by glass fiber
Developed with knowledge of modern and efficient blade profiles for high performance
Avaliable in diameters from 9" to 24".

Dimension: 33/18 cm, 13/7"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models.

7.32€  Inc Tax
FOXY Pro Propeller 12x7 (2VRP1207P)
Designed for airplanes with combustion engine.

Features:
Made of high strength polyamid, 50% filled by glass fiber
Developed with knowledge of modern and efficient blade profiles for high performance
Avaliable in diameters from 9" to 24".

Dimension: 30/18 cm, 12/7"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models.

5.49€  Inc Tax
FOXY Carbon Propeller 14x6 (2VRP1406C)
Designed for airplanes with high power electro & internal combustion engines.

Features:
Carbon fiber filled plastic
Available in diameters from 7" to 14"

Dimension: 36/15 cm, 14/6"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models requiring high thrust high performance propellers.

9.76€  Inc Tax
FOXY Speed Propeller 7x7 (2VRP0707S)
Designed for fast airplanes with internal combustion or high RPM electric engine.

Features:
Made of high strength polyamid, 50% filled by glass fiber Developed with knowledge of modern and efficient blade profiles for highest performance Avaliable in diameters from 6" to 7"

Dimension: 17/17 cm, 7/7"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models requiring high thrust high performance propellers.

3.05€  Inc Tax
FOXY G3 Brushless Motor C2826-750kv (3BL2700)
FOXY G3 C2826-750

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2826-750 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2826-750 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3548; The marking according to the stator dimensions: C2826

Specifications:
No. of (LiXX) cells: 3-5
Motor Kv: 750 rpm/V
Max power (30s/5S Lipo): 580W
No-load current (3S): 2.1A
Max peak current (30s): 42A
Diameter: 35mm
Length: 50.7mm
Shaft diameter: 5mm
Weight: 172g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 50-60A

Application:
Gliders up to: 2700g
Trainers up to: 2600g
Acro planes up to: 2300g
3D airplanes up to: 1500g

Recommended propellers:
4S: 13X6,5”
5S: 11X6”

34.16€  Inc Tax
Foxy Indoor Propeller 9x5" (2VRP0905I)
Foxy indoor line of propellers made of tough plastic designed for Slow-Flyers, Park-Flyers and all other slow flying model airplanes with electric motor. Avaliable in diameter from 3" to 11".

Dimension: 9x5" (23x12cm)

Prop screw diameter: 5mm

3.90€  Inc Tax
Foxy Indoor Propeller 8.5x4" (2VRP8504I)
Foxy indoor line of propellers made of tough plastic designed for Slow-Flyers, Park-Flyers and all other slow flying model airplanes with electric motor. Avaliable in diameter from 3" to 11".

Dimension: 8.5x4" (21.5x10cm)

Prop screw diameter: 5mm

3.66€  Inc Tax
FOXY Wooden Propeller 13x10 (1VR1310)
FOXY Wooden Propellers

Dimension: 13x10

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

9.76€  Inc Tax
FOXY Wooden Propeller 16x10 (1VR1610)
FOXY Wooden Propellers

Dimension: 16x10

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

12.20€  Inc Tax
FOXY Wooden Propeller 17x8 (1VR1708)
FOXY Wooden Propellers

Dimension: 17x8

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

14.03€  Inc Tax
FOXY Pro Propeller 14x7 (2VRP1407P)
Designed for airplanes with combustion engine.

Features:
Made of high strength polyamid, 50% filled by glass fiber
Developed with knowledge of modern and efficient blade profiles for high performance
Avaliable in diameters from 9" to 24".

Dimension: 36/18 cm, 14/7"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models.

7.93€  Inc Tax
FOXY Carbon Propeller 11x8 (2VRP1108C)
Designed for airplanes with high power electro & internal combustion engines.

Features:
Carbon fiber filled plastic
Available in diameters from 7" to 14"

Dimension: 28/20 cm, 11/8"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models requiring high thrust high performance propellers.

6.10€  Inc Tax
FOXY Wooden Propeller 14x6 (1VR1406)
FOXY Wooden Propellers

Dimension: 14x6

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

10.98€  Inc Tax
FOXY Carbon Propeller 11x6 (2VRP1106C)
Designed for airplanes with high power electro & internal combustion engines.

Features:
Carbon fiber filled plastic
Available in diameters from 7" to 14"

Dimension: 28/15 cm, 11/6"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models requiring high thrust high performance propellers.

6.10€  Inc Tax
FOXY Wooden Propeller 18x10 (1VR1810)
FOXY Wooden Propellers

Dimension: 18x10

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

16.47€  Inc Tax
FOXY Wooden Propeller 14x8 (1VR1408)
FOXY Wooden Propellers

Dimension: 14x8

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

10.98€  Inc Tax
FOXY Wooden Propeller 15x6 (1VR1506)
FOXY Wooden Propellers

Dimension: 15x6

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

12.20€  Inc Tax
FOXY Carbon Propeller 12,5x6 (2VRP1256C)
Designed for airplanes with high power electro & internal combustion engines.

Features:
Carbon fiber filled plastic
Available in diameters from 7" to 14"

Dimension: 32/15 cm, 12,5/6"
Prop screw dia.: 8 mm

Use for RC aircraft, aerobatic or scale radio controlled airplanes and other models requiring high thrust high performance propellers.

7.32€  Inc Tax
FOXY Wooden Propeller 14x10 (1VR1410)
FOXY Wooden Propellers

Dimension: 14x10

High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!

FOXY propellers are designed and manufactured in the Czech Republic.

10.98€  Inc Tax
Per Page      1 - 23 of 23
  • 1